Start Here

1. Subscribe to the SiriusXM Music for Business Internet Service

Start Here

To listen to the SiriusXM Music for Business Internet Service, you will need to subscribe to the service. Call

1-866-345-SIRIUS (7474) to subscribe and obtain your SiriusXM username and password (credentials).

Using an Android or Apple device, go to the Google Play Store or Apple iTunes Store and install the

SiriusXM Music For Business app. Note that the Android or Apple device will need to be on the same

network as the Radio.

A. Connect the Power Adapter to the DC IN 5V connector, and plug the Power Adapter into an AC outlet. The

Radio will power on automatically.

B. Connect the Radio to a audio system using the provided Stereo Audio Cable, and turn on the audio system.

C. Select one of the network connection options that follow. Note that when you initially connect to a network, the

radio will download and install a firmware update. Don’t unplug the power during the update. Normally, a solid

blue light on front of Radio indicates the update is completed. During the update the light will flash red and the

radio will be unresponsive until the update is completed.

Wired Network Connection (BREO or BREW) (recommended): To connect the Radio with a wired connection,

connect the Ethernet cable to the LAN connector of the Radio. Connect the other end to your local network.

Wireless Network Connection (BREW only):

Method 1: Use Bluetooth in your Android or Apple device.

1. Make sure there is no Ethernet cable connected to the Radio. Turn on Bluetooth® in your Android or

Apple device and have it near the Radio. Start the app and tap + at the lower right for Android app, and

upper right for iOS app, to find the Radio. The name of the Radio will be displayed if found.

2. Tap the Radio that is shown.

3. Tap your Wi-Fi network in the list and enter the Wi-Fi password, if prompted. Tap Save or OK to connect

to the Wi-Fi network. If the Radio has successfully connected to the network the light on the front of the

radio should be blue.

Method 2: Temporarily connect an Ethernet cable.

1. Temporarily connect the Ethernet cable to the LAN connector of the Radio. Connect the other end to

your local network. The Android or Apple device running the app will need to be on the same network

as the Radio. Start the app, swipe down the screen to find the Radio on your network. The name and the

IP address of the Radio will be displayed if found.

2. Tap the Radio that is shown. When prompted, enter the default admin password 0000.

3. Tap Settings, tap Network Wizard, tap Wireless, tap Scan to see a list the of available Wi-Fi networks.

4. Tap your Wi-Fi network in the list and enter the Wi-Fi password, if prompted. Tap Save or OK to connect

to the Wi-Fi network. If the Radio has successfully connected to the network the light on the front of the

radio should be blue.

5. Disconnect the Ethernet cable.

2. Download the App

3. Connect the Radio

SiriusXM Music For Business Internet Radio Quick Start Guide

The full User Guide may be found at:

www.siriusxm.com/guides

SiriusXM Music For Business Internet Radio Quick Start Guide

SXBREO/SXBREWQSG 200324b

IMPORTANT NOTICE: REQUIRED SUBSCRIPTION

Hardware and subscription sold separately, and activation fee required. Other fees and taxes may apply. Your subscription is governed by our

Customer Agreement which you will ﬁnd at http://www.siriusxm.com/pdf/siriusxmbiz_customeragreement_eng.pdf. Prices and programming

are subject to change. Service automatically renews into the subscription Package you choose, for additional periods of the same length,

and automatically bills at the then current rates, after any complimentary trial or promotional period ends, until you call us at 1-866-345-

7474 to cancel. Our satellite service is available only to those at least 18 and older in the 48 contiguous USA and D.C. Our Sirius satellite service

is also available in PR (with coverage limitations). Our Internet radio service is available throughout our satellite service area and in AK and HI.

Self installation instructions and tips are provided for your convenience. It is your responsibility to determine if you have the knowledge,

skills and physical ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from

the installation or use of any SiriusXM or third party products. It is your responsibility to ensure that all products are installed in adherence

with local laws and regulations. SiriusXM product warranties do not cover the installation, removal or reinstallation of any product.

Sirius XM Radio Inc, 1290 Avenue of the Americas, New York, NY 10104 1.866.345.7474

What’s in the Box?

SiriusXM BREW or BREO Business Radio

Stereo

Audio Cable

Power Adapter

Ethernet

Cable

LED, Connectors, and Button Function

1. LED Indicator:

LED Color Description

White Power on — Not connected to a network

Blue Connected to a network — Not playing

Green Playing

Flashing Green Retrying

Flashing Red

Firmware update in progress. (Note that the Radio

may be unresponsive during an update).

2. LAN: Connector for a wired Ethernet connection.

3. Stereo Out L/R: Used to connect the Radio to a stereo audio system.

4. Mono Out: Used to connect the Radio to a phone system.

5. DC IN 5V: Power connector for the supplied Power Adapter. (5 volts)

6. Reboot/Reset Button: Short press to restart Radio — 10 second press to

reset the Radio to the factory defaults.

STEREO OUT

MONO OUT

LAN

DC IN 5V

3 4 5

A. In the app, tap the Radio that is shown. When prompted, enter the default admin password 0000.

B. If Settings is not shown, tap the Home icon at the upper left.

C. Tap Settings and then tap Timezone and tap your time zone.

D. Tap Settings again and then tap SiriusXM Account and enter the SiriusXM username and password from step 1

and select Sign In.

5. Select the Timezone and Enter Your SiriusXM Account Credentials

6. Selecting a Channel and Scheduling

The ﬁrst time the Radio successfully connects to the SiriusXM Music for Business Internet Service, no channel will

have been selected to play.

A. In the app, tap the Radio that is shown. When prompted, enter the default admin password 0000.

B. Tap Categories, select a genre, and select a channel. The light on the front of the radio should be green.

C. To enable remote control and setup scheduling for the Radio, enable remote control in the radio. Tap

Settings, tap Remote Scheduling, tap Enable schedule so that the box is checked. Then go to