PXN-V3PRO
RACING WHEEL
USER MANUAL
USB port for
original
controller
（PS4/Xbox One）
Indicator
（1/2/3/4）
Product Overview
.
Thank you for choosing PXN s product and
supporting our brand. Please read the manual
carefully before using.
,
Programming
LED indicator
HOME
Mode LED
indicator
Dual Paddles
Port Of
Pedal
Shifter
Function Features
.
1. Compatible with PC/PS3/PS4/XBOX-ONE/SWITCH
consoles；
2. Built-in dual vibration motor, to bring you a more
realistic racing experience；
3. Imitation racing wheel ergonomics design, 180
turning angles and rubber grip；
4. Collapsible simulation pedals with Gas and Braking
control；
5. Strong suction cups, and C-type grip, easy to use
on different surface fixed；
6. With X-input/D-input function for PC;
7. The dead zone of direction, refueling and braking
is adjustable in D-Input mode.
System Requirements
.
Support Platform：PC/PS3/SWITCH/PS4/XBOX ONE
Support System：Microsoft Windows XP/7/8/10
For use with PC
.
Installation
1. Browse our homepage（www.e-pxn.com）
download and install the driver. The specific path
is : www.e-pxn.com ---Support--- Driver---PXN-V3.
2. Download t he "PXN-V3" drive and then press
the instructions to extract the installation.
X-input D-input
Press “HOME” 3S
3. Plug the pedals into the port of steering wheel
base and plug the USB of steering wheel into the
computer USB port. The computer will be
prompted to discover the new hardware and
complete the drive installation.
MODE Selection
1. When connecting the racing wheel is default to
X-input mode，press "HOME" for 3 seconds
change into D-input mode , the red LED is bright.
2. X-input MODE is compatible with Games for
windows，Plug and play，such as: "Need for
Speed 13" above version, "Dust2/3", "Ridge
Racing: Unlimited" and so on.
3. D-input MODE is compatible with early PC racing
games, such as: "Need for Speed 1-12" , Euro Truck
Simulator and so on.
X-input mode
.
1.Connect the racing wheel to the USB port
of the computer, default to X-input mode,
Red LED light on.
2.Function Texting:
It can go through function texting by
computer game controller under
PC computer use.
XP system, click Control Panel--- game
controller, click Propeties to test the racing wheel.
WIN7 system above, click Control Panel---
Devices and Printers---right-hand button click
gamepad icon---game controller settings, click
Propeties to test the racing wheel.
D-input mode
.
1. Under X-input mode, Press“HOME”for 3
seconds Switch to D-input.
2.Click the Propeties button and enter the
next figure test interface, then you can test
the Axes and Buttons.
3.Vibration Test：
Click "Vibration Test" to test motor vibration,
while the vibration intensity can be adjusted
freely.
Program Functions(Without memory)
1.Program source button: X/B/Y/A/L1/L2/R1/
R2；
2.Programmable button: L-Paddle, R-Paddle,
Accelerator, Brake,L3,R3, Shifter.
Program setup
1.Press SHARE + OPTIONS, Hold for 3 seconds
until the green LED is on.
2.Press the programmable button, and the
green LED starts blinking.
3.Press program source button. The green
LED is off. Program is set.
Clear single program
1.Press SHARE + OPTIONS, Hold for 3 seconds
until the green LED is on.
2.Press programmed button and the green
LED starts blinking.
3.Press programmed button again and the
green LED is off. Single programmed button
is cleared.
Clear all programs
1.Press SHARE +OPTIONS, Hold for 3 seconds
until the green LED is on.
2.Press OPTIONS and hold for 4 seconds. The
green LED is off. All of the programmed
buttons are cleared. Default is restored.
Note: All of the settings will NOT be cleared
when the wheel is power off. All settings
Middle
(Green LED
is flashing)
High
(Green LED
flashes quickly)
Low
(Green LED
flashes slowly)
will be cleared out after all program setting
been cleared out.
Program Pedals as Y axis
1.Press SHARE. Hold for 3 seconds until the
green LED is on.
2.Press LEFT of the D-PAD. The green LED is
off. Pedals are programmed as Y function.
Program L-Wing and R-Wing as Y axis
1.Press SHARE. Hold for 3 seconds until the
green LED is on.
2.Press RIGHT of the D-PAD. The green LED is
off. Pedals are programmed as Y function.
3 levels wheel sensitivity adjustment
1.Press SHARE + OPTIONS at the same time.
Hold for 3 seconds until green LED is on.
Release the button.
2.Press SHARE again. Current sensitivity is
displayed
3.Press SHARE a third time to select
sensitivity level. It cycles as below:
4.Press UP of the D-PAD to confirm and quit.
For use with PS3/SWITCH
.
1.Plug the USB of racing wheel into thePS3/
SWITCH USB interface, power on the console.
2.After connection, the console will allocate a
channel to Racing wheel and the compared
indicator light on. You can start to play game
or set functions of console.
For use with PS4
.
1.Use USB cable to connect original PS4
controller to racing wheel’s USB port
(Power OFF the controller).
2.Plug the USB of Racing wheel into PS4 USB
interface.
3. Press “HOME” Button on Racing wheel.
When racing wheel can control the console
interface which mean connected successfully.
For use with XBOX ONE
.
1.Use USB cable to connect original XBOX
ONE controller to racing wheel’s USB port
(Power OFF the controller).
2.Plug the USB of Racing wheel into XBOX
ONE USB interface.
3.After connection, Press “HOME” Button
on Racing wheel.When racing wheel can
control the console interface which mean
connected successfully.
1. Avoid fierce vibration. Don’t take apart, revise and
mend by yourself.
2. Don’t let water or other liquid entering inside of
the gamepad to make any damages.
3. Don’t store in places of high humidity,
temperature, heavy oil or smoke.
4. Don’t drop the gamepad into fire or explosion
danger may be caused by built-in battery.
5. Children should be under the custody of adults to
use this product.
Attentions
.
Specifications
.
Product Mode RACING WHEEL
Mode No. PXN-V3 PRO
Connection USB wired，2m wire
DC 5V
Temperature
10-40℃
20~80%
Humidity
Packing Size Appr. 350x325x270MM
Current
Normal <10mA,vibration <170mA
Product Size Appr. 260x320x245MM
Net Weight Appr. 2360g
Working
Power Supply
Application
