Consumer Protection
(Safety Requirements)
Regulations
Information Booklet
2
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
© 2021 Enterprise Singapore
230 Victoria Street #09-00, Bugis Junction Office Tower, Singapore 188024
Hotline : 6898 1800
Website : www.consumerproductsafety.gov.sg
Published : 1 April 2002
Updated : 31 May 2021
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electronic, mechanical, photocopying, recording
or otherwise, without prior written permission of the publisher.
3
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Table of Contents
1.0 Preface ....................................................................................................................... 5
2.0 Introduction ................................................................................................................ 6
3.0 Key Regulations ......................................................................................................... 9
4.0 Controlled Goods and their Applicable Safety Standards and Requirements ............ 11
4.1 Safety Standards and Requirements of Controlled Goods by Risk Level .............. 12
4.2 Additional Requirements for registration of Controlled Goods ............................... 26
5.0 Registration .............................................................................................................. 38
5.1 Parties that Need to Apply for Registration ........................................................... 38
5.2 Registration of Supplier of Controlled Goods ........................................................ 39
5.3 Registration of Controlled Goods .......................................................................... 41
5.4 Certificate of Conformity........................................................................................ 44
5.5 Modifications to Registered Controlled Goods ...................................................... 49
6.0 SAFETY Mark .......................................................................................................... 52
7.0 Technical File ........................................................................................................... 53
Appendix A - Definitions ...................................................................................................... 55
Appendix B - Examples of Controlled Goods ...................................................................... 57
Appendix C - Examples of Non-Controlled Goods ............................................................... 60
Appendix D Certificate of Conformity ............................................................................... 62
Appendix E Letter of Approval .......................................................................................... 63
Appendix F - Guidelines for Using Safety Mark on Registered Controlled Goods ................ 64
Appendix G - Guidelines for Using Safety Mark in Advertisements or Publicity Materials .... 67
Appendix H - Drawings Showing Acceptable and Not Acceptable Fan Motor Shaft for
Decorative Ceiling Fan ........................................................................................................ 69
Appendix I - Diagram Showing the 3 Expansion Bolts, Safety Cord, Expansion Bolts with
Hook and Mounting Plate of Ceiling Fan ............................................................................. 70
Appendix J - Installation Instructions for Fixing Gas Cooker Elbow Joint ............................. 71
Appendix K - Examples of 2-Pin Mains Plug In Accordance To EN 50075 .......................... 72
Appendix L - Examples of Non-Acceptable Mains Plugs ..................................................... 73
Appendix M - Examples of 2-Pin And 3-Pin AC Adaptors .................................................... 74
Appendix N - Diagram Showing A Metal Ring Around Glass Bowl Used with Roaster ........ 75
Appendix O - Specifications of Gases Distributed in Singapore for Domestic Gas Appliances
........................................................................................................................................... 76
4
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix P - Controlled Goods Subject to Additional Requirements by Other Agency(ies) in
Singapore ........................................................................................................................... 78
Appendix Q - Summary of Updates ..................................................................................... 79
5
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
1.0 Preface
This information booklet serves as a guide to the definitions (Appendix A) and registration of
Controlled Goods and other requirements related to the Consumer Protection (Safety
Requirements) Regulations (CPSR).
The Consumer Product Safety Office (CPSO) is an office overseen by Enterprise Singapore
that is responsible for implementing the CPSR. The CPSO reserves the right to revise the
booklet and introduce new safety standards or additional safety requirements as and when
the need arises.
Users are advised to obtain the latest version of this booklet from the website
www.consumerproductsafety.gov.sg.
We appreciate any feedback so that improvements to this booklet could be made. Please
send your feedback to:
Enterprise Singapore
Consumer Product Safety Office
230 Victoria Street #09-00
Bugis Junction Office Tower
Singapore 188024
Hotline : 6898 1800
Email : consumerproductsafety@enterprisesg.gov.sg
Website : www.consumerproductsafety.gov.sg
6
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
2.0 Introduction
The objective of the Consumer Protection (Safety Requirements) Regulations or CPSR is
to safeguard consumers’ interest by ensuring household products, designated as Controlled
Goods, meet the specified safety standards.
Undoubtedly, consumers today are prepared to pay for products that are safe and of high quality.
The development of the CPSR is therefore consistent with the growing sophistication of
consumers in Singapore.
The CPSO is an office overseen by Enterprise Singapore that is responsible for the
implementation of the CPSR. One of the roles of the CPSO is to ensure compliance by the
industry on the registration of thirty-three (33) categories of Controlled Goods. The definitions
and applicable safety standards of the Controlled Goods are provided in Chapter 4 of this
information booklet. Some examples of Controlled and Non-Controlled Goods are identified in B
and C respectively.
Suppliers of Controlled Goods for consumers in Singapore must first be registered with the
CPSO as Registered Suppliers (Chapter 5.2). Registered Suppliers are required to register
each model of Controlled Goods with the CPSO. Registrations of Controlled Goods must be
supported with either:
1. Certificate of Conformity (CoC) issued by designated third party Conformity
Assessment Bodies (CABs) in Singapore or in Singapore’s Mutual Recognition
Agreement (MRA) partners, i.e. CABs (Certification/Testing), or
2. Supplier’s Declaration of Conformity (SDoC) declared by Registered Suppliers.
Once the model has been registered with the CPSO, the Controlled Goods can then be
advertised for supply and/or supplied in Singapore.
We would like to draw your attention to Regulation 4(1) of the Regulations, where it is stipulated
that no person shall trade, supply or advertise for the purpose of supplying any of the Controlled
Goods in Singapore after the specified dates, unless the Controlled Goods are registered with
the CPSO and are affixed with the SAFETY Mark. Hence, merely labelling products or stamping
receipts For Export Onlyis not an excuse for not registering Controlled Goods. A person guilty
of an offence under Regulation 4, shall be liable on conviction, to a fine not exceeding
$10,000/- or to imprisonment for a term not exceeding two years or to both.
7
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
About the SAFETY Mark: The SAFETY Mark comprises of a safety logo enclosed in a square
on the left and the wordSAFETY MARK” enclosed in a rectangle on the right. Below the logo
is a unique certification number traceable to the registrant. The colour used is Pantone 032C.
Refer to Appendix F for Guidelines for Using Safety Mark on Registered Controlled Goods
An overview of the registration process for Controlled Goods is illustrated in the flowchart next
page:
8
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Supplier to obtain valid test report. For
medium/high risk products; supplier to
obtain certification through CAB. For low risk
products; supplier to provide SDoC
Controlled Goods is registered with the
CPSO upon receiving the LOA
Registered Supplier affixes the SAFETY Mark
and commences supply of the registered
Controlled Goods
Registered Supplier applies for
renewal of CoC/SDoC 6 months
before expiry date CoC/SDoC
expires
9
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
3.0 Key Regulations
Regulation 4(1): No person shall, in the course of any trade or business, supply or
advertise for the purpose of supply any Controlled Goods after the
effective date specified in the First Schedule unless-
i) such Controlled Goods are registered Controlled Goods
conforming to the safety requirements specified by the CPSO for
those goods; and
ii) such Controlled Goods have affixed to them the Safety Mark in
accordance with Part III.
Regulation 4(2): Where any person contravenes paragraph (1), he shall be guilty of an
offence under section 11(2) of the Act, and the CPSO may-
1 require such person to effect a recall of the Controlled Goods and
keep the CPSO informed of the progress of such recall; and
2 take such steps as may be necessary to inform users of the
Controlled Goods of the potential danger of such goods.
Regulation 8(1): The registration of any Controlled Goods shall be valid for a period of 3
years or the period of validity of the certificate of conformity of the
Controlled Goods, whichever is the less, and may be renewed.
Regulation 24(4)(a): A Registered Supplier who fails or neglects to effect a recall of the
registered Controlled Goods required by the CPSO under paragraph
(2)(b)(i) shall be guilty of an offence and shall be liable on conviction to
a fine not exceeding $2,000 or to imprisonment for a term not exceeding
12 months or to both.
10
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Proposed Change:
As per Regulation 4(1) of the CPSR, all Controlled Goods supplied in Singapore, in the
course of any trade or business, need to be
1) Duly registered with the CPSO in accordance to the requirements specified.
2) Have the Safety Mark affixed to them in accordance to the characteristics and form
stipulated by the CPSO
It is an offence to supply any Controlled Goods without meeting the listed requirements
above. Any person found guilty of the offence shall be liable on conviction to a fine up to
$10,000 or to imprisonment for a term up to 2 years or both.
The CPSO may also, per Regulation 4(2) of the CPSR, require such person to
1) Conduct a product recall of affected Controlled Good, and provide periodic updates
on the progress.
2) Inform users of the affected Controlled Good on the potential dangers involved.
Any person who fails or neglects to effect a recall when required by the CPSO shall be guilty
of an offence and liable on conviction to a fine up to $2,000, or to imprisonment for a term up
to 12 months or to both
As per Regulation 5(2) of the CPSR, any importer or manufacturer, in the course of any
trade or business, who intends to supply, or advertise for supply controlled goods in
Singapore shall apply to the CPSO
1) To be registered as a Registered Supplier
2) To register any controlled goods which the importer or manufacturer intends to
supply, or advertise for supply in Singapore
It is an offence to supply or advertise for supply any controlled goods without meeting the
listed requirements above. An importer or manufacturer found guilty of the offence and shall
be liable on conviction to a fine up to $2,000 or to imprisonment for a term up to 12 months
or to both.
11
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
4.0 Controlled Goods and their Applicable Safety Standards and
Requirements
Controlled Goods are required to be tested to the minimum edition of the safety standards
stated in this chapter. In addition to the specified safety standards, Controlled Goods are
required to fulfil the CPSO’s requirements. A compilation of the safety standards and the
CPSO’s requirements each Controlled Good is required to fulfil is tabled in Chapter 4.1.
The CPSO categorises the Controlled Goods into three risk levels - Low, Medium, and High.
The table below shows the conformity assessment approach adopted for each of the three
risk levels.
Risk Level
Conformity Assessment Approach
Low
Type testing
1
+ Supplier’s Declaration of Conformity (SDoC)
Medium
Type testing + Certificate of Conformity (CoC)
High
Type testing + CoC + high risk requirement for renewal (Chapter 5.4)
Note:
(1) Type testing is testing carried out by recognised testing laboratories to determine whether a product
complies with the specified safety standard.
The test report including its test certificate (if applicable) must be provided for all Controlled
Goods. A test report dated more than three (3) years shall be rejected.
For Controlled Goods incorporated with additional functions:
a) The additional function must be tested to its applicable safety standard.
b) If a product has both functions of a Controlled Good and Non-Controlled Good, the
product should be classified a Controlled Good as a whole. The fact that it may have
other functions that do not fall within the 33 categories is irrelevant. However, if the
product with ‘controlled’ and ‘non-controlled’ functions are capable of being entirely
and physically separated, such that it can be treated and sold as two separate and
distinct products, then the registration can apply to only the ‘controlled’ product, and
not the ‘non-controlled’ product.
12
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
4.1 Safety Standards and Requirements of Controlled Goods by Risk Level
Controlled Goods by Risk Level
Low
Air cooler
Fuse (13 amperes) for use in a plug
Room air-conditioner
Table lamp/Standing lamp
Medium
AC adaptors
Audio and video products
Coffee maker, slow cooker, steamboat and similar appliances
Decorative lighting chain
Fans
Gas canister
Hair care appliances
Home computer system (inclusive of monitor, printer, speaker,
and other mains operated accessories)
Iron
Isolating transformer for downlight fitting
Kitchen machines
Lamp control gears
Liquid heating appliance
Microwave oven
Multi-way adaptor
Portable socket-outlet
Residual Current Circuit Breaker (RCCB)
Rice cooker
Stationary cooking appliances
Toaster, grill, roaster, hot plate, deep fryer, wok, and similar
appliances
Vacuum cleaner
Washing machine
3-pin mains plug
High
Components of Liquified Petroleum Gas system
Domestic electric wall switch
Gas cooking appliances
Mains socket-outlets
Refrigerators
Water heaters
13
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Low Risk Controlled Goods
Controlled Good and
Definition
Safety Standard(s)
Additional Requirements
(refer to chapter 4.2)
Air cooler
Air coolers, which are
electrical appliances
intended for household use to
agitate the air and equipped
to use water as a cooling
medium, with rated voltage of
not more than 250 VAC.
IEC 60335-2-98: 2002
Requirements for
electrical products
Fuse (13 amperes) for use
in a plug
Fuses (13-amp or less) for
use in a 13-amp plug, which
are devices that, by the fusion
of one or more of their
specially designed and
proportioned components,
open the circuit in which they
are inserted and break the
current when it exceeds a
given value for a sufficient
time.
SS 167: 1977
Requirements for
electrical products
Room air-conditioner
Room air-conditioners,
which are electrical
appliances intended for
household use and designed
as self-contained units for
mounting on a window or
through a wall to provide
conditioned air to an
enclosed area, with rated
voltage of not more than
250 VAC.
IEC 60335-2-40: 2002
Requirements for
electrical products
14
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Table lamp/Standing lamp
An electrical portable
general-purpose luminary
intended for household use
with supply voltage of not
more than 250 VAC.
IEC 60598-2-4: 2017
Requirements for
electrical products
Requirements for
table lamp/standing
lamp
Medium Risk Controlled Goods
Controlled Good and
Definition
Safety Standard(s)
Additional Requirements
(refer to chapter 4.2)
AC Adaptor
A device with rated voltage
of not more than 250 VAC,
and designed to supply AC
or DC power for applications
such as computers,
telecommunication
equipment, home
entertainment equipment or
toys.
IEC 61558-2-6: 1997
or
IEC 61558-2-16: 2009
(applicable for electrical
appliances)
Requirements for
electrical products
Requirements for AC
adaptors
IEC 60065: 2001
or
IEC 62368-1:2014
(applicable for electronic
appliances)
IEC 60950-1: 2001
or
IEC 62368-1:2014
(applicable for computer /
telephonic appliances)
IEC 60335-2-8: 2002
(applicable for shavers)
IEC 60335-2-29: 2002 with
A1
15
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
or
IEC 60335-2-29: 2004
(applicable for battery
chargers)
IEC 61347-2-13: 2006
(applicable for LED
lightings)
IEC 60598-2-4: 1997
(valid till 30/11/2021)
IEC 60598-2-4: 2017
(applicable for
table/standing lamps)
IEC 60601-1: 2005
(applicable for breast pump)
Audio and video products
Audio and video products,
which are electronic devices
for home entertainment
designed to be fed from the
supply mains and intended
for reception, generation,
recording or reproduction,
respectively of audio, video
and associated signals, with
rated voltage of not more
than 250 VAC.
IEC 60065: 2001
or
IEC 62368-1:2014
Requirements for
electrical products
Requirements for
plasma / LCD display
monitor
Coffee maker, slow
cooker, steamboat and
similar appliances
Coffee makers, slow
cookers, steamboats and
similar appliances, which are
electrical appliances
intended for household use
IEC 60335-2-15: 2002
Requirements for
electrical products
16
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
to heat liquids for the
purpose of food or
beverages preparation, with
rated voltage of not more
than 250 VAC.
Decorative lighting chain
Decorative lighting chains,
which are electrical lightning
chains intended for
household use and fitted with
a series or parallel or
combination of series or
parallel connected light
emitting devices, with rated
voltage of not more than 250
VAC.
IEC 60598-2-20: 2002
Requirements for
electrical products
IEC 60598-2-21: 2014
(Applicable for rope lights)
Fan
Fans, limited to ceiling, table,
standing and wall fans,
which are electrical
appliances for circulating the
air in its vicinity and intended
for household use, with rated
voltage of not more than 250
VAC.
IEC 60335-2-80: 2002
or
SS 665: 2020
(applicable for table,
standing or wall fan)
Requirements for
electrical products
Requirements for
ceiling and cycle fans
IEC 60335-2-80: 2002 + SS
360: 1992 (sub-clauses 5.7
& 5.8 only) (valid till
31/03/2022)
or
IEC 60335-2-80: 2002 + SS
655: 2020 (Annex ZA only)
or
SS 655:2020
(applicable for ceiling or
cycle fan)
17
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Gas canister
A non-refillable metallic
container up to 1.4 litres
capacity filled with liquefied
petroleum gases intended
for household use with a
portable gas cooker.
SS 400: 1997
Requirements for
gas appliances
Hair care appliances
Hair care appliances, limited
to hair dryers, hair curlers,
hair straighteners and hair
stylers, which are electrical
hand-held appliances
intended for household use to
dry or care for human hair,
with rated voltage of not more
than 250 VAC.
IEC 60335-2-23: 2003
Requirements for
electrical products
Home computer system
(inclusive of monitor,
printer, speaker and other
mains operated
accessories)
Home computer system
(inclusive of monitor, printer,
speaker and other mains
operated accessories),
which is a microcomputer
and its associated
accessories, intended for
household use, with rated
voltage of not more than 250
VAC.
IEC 60950-1: 2001
or
IEC 62368-1: 2014
Requirements for
electrical products
Requirements for
computer products
Iron
Irons, which are electrical
hand-held appliances
intended for household use,
with a heated soleplate for
smoothing or pressing fabric,
including those with a
separate water reservoir or
IEC 60335-2-3: 2002
Requirements for
electrical products
18
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
boiler having a capacity not
exceeding 5 litres, with rated
voltage of not more than 250
VAC.
Isolating transformer for
downlight fitting
Isolating transformers for
downlight fitting, which are
isolating transformers
intended for household
electrical installation with
input and output windings
that are electrically separated
to limit hazards due to
accidental simultaneous
contact with earth and live
parts or metal parts that may
become live in the event of an
insulation failure.
IEC 61558-2-6: 1997
(magnetic type)
Requirements for
electrical products
IEC 61347-2-2: 2000
(electronic type)
Kitchen machines
Kitchen machines, including
mixers, blenders and
mincers, which are electrical
appliances intended for
household use to prepare
food or beverages, with rated
voltage of not more than
250 VAC.
IEC 60335-2-14: 2002
Requirements for
electrical products
Lamp control gear
Lamp control gears, which
are electrical devices
intended for household
electrical installations that
limit the current of the lamp
or supply constant current or
constant voltage power to
LED lighting.
IEC 61347-2-8: 2000
(magnetic type)
Requirements for
electrical products
IER 61347-2-3: 2000
(electronic type)
IEC 61347-2-13: 2000
(for LED driver)
19
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Liquid heating appliances
Liquid heating appliances,
limited to kettles, airpots and
hot water dispensers, which
are electrical appliances
intended for household use
to heat liquids for
consumption that have a
rated capacity not exceeding
10 litres, with rated voltage of
not more than 250 VAC.
IEC 60335-2-15: 2002
Requirements for
electrical products
Requirements for
electric airpot
Requirements for
water dispensers
IEC 60335-2-21: 2004
(hot water dispenser-storage
type)
IEC 60335-2-35: 2002
(hot water dispenser-
instantaneous type)
Microwave oven
Microwave ovens, which are
electrical appliances
intended for household use
that use high-frequency
electromagnetic waves for
heating food or beverages,
with rated voltage of not more
than 250 VAC.
IEC 60335-2-25: 2002
Requirements for
electrical products
Multi-way Adaptor
Multi-way adaptors, which
are intended for household
use, have more than one set
of socket contacts, and
which may or may not be of
the same type or rating as
the plug pin portion.
SS 246: 2004
(valid till 25/10/2021)
or
SS 145-3: 2020
(Applicable for conventional
Multi-way Adaptors and
Multi-way Adaptors
incorporating USB Port(s)
and/or electronic devices)
Requirements for
Multi-way Adaptors
Portable socket-outlet
3-pin portable socket-
outlets, including portable
cable reels, which are
electrical accessories
intended for household use
that have at least a set of 13-
amp shuttered
SS 145: Part 2: 1997
(3-pin portable socket-outlet)
Requirements for
electrical products
Requirements for
portable/wall socket
outlet and portable
cable reels
SS 145- 2: 2018
(3-pin portable socket outlet
incorporated with USB
20
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
socket-outlets with flexible
cords, and which can be
easily moved from one place
to another while connected
to rated voltage supply of not
more than 250 VAC.
port(s) and/or electronic
device(s))
(Mandatory to use this
standard from 9 Sep 2020)
SS 307: 1996
(Portable cable reel)
SS 241: 1996 + SS 145-2:
2018
(applicable for power track
incorporated with USB
port(s) and/or electronic
device(s))
Residual Current Circuit
Breaker (RCCB)
Residual current circuit
breaker (RCCB), which is an
electrical device intended for
household fixed-electrical
installation with sensitivity of
30 mA intended to protect
persons against indirect
contact, the exposed
conductive parts of the
installation being connected
to an appropriate earth
electrode.
SS 97- 1: 2005
Requirements for
electrical products
Requirements for
RCCB
Rice cooker
Rice cookers, which are
electrical appliances
intended for household use
to cook rice, with rated
voltage of not more than
250 VAC.
IEC 60335-2-15: 2002
Requirements for
electrical products
Stationary cooking
appliances
Stationary cooking
appliances, limited to cooking
IEC 60335-2-6: 2002
Requirements for
electrical products
21
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
ranges, hobs and ovens,
which are electrical stationary
appliances intended for
household use for cooking,
with rated voltage of not more
than 250 VAC for
single-phase and 480 VAC
for three-phase.
Toaster, grill, roaster, hot
plate, deep fryer, wok and
similar appliances
Toasters, grills, roasters, hot
plates, deep fryers and
similar appliances, which are
electrical appliances
intended for household use
that use heated medium
such as air and cooking oil
for food preparation, with
rated voltage of not more
than 250 VAC.
IEC 60335-2-9: 2002
(applicable for toaster, hot
plate (including induction
type), grill, oven and similar
appliances)
Requirements for
electrical products
Requirements for
roasters
IEC 60335-2-13: 2002
(applicable for deep fryer,
electric wok and similar
appliances)
IEC 60335-2-78: 2002
(applicable for outdoor
electric barbeque grill)
Vacuum cleaner
Vacuum cleaners, which are
electrical portable
appliances intended for
household use to remove dirt
or dust, with supply voltage
of not more than 250 VAC.
IEC 60335-2-2: 2002
Requirements for
electrical products
Washing machine
Washing machines, which
are electrical appliances
intended for household use
to wash clothes and textiles,
with rated voltage of not
more than 250 VAC.
IEC 60335-2-7: 2000
Requirements for
electrical products
22
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
3-pin mains plugs
3-pin mains plugs, limited to
13-amp rectangular types
and 15-amp round types,
which are portable devices
that have rectangular or
cylindrical projecting pins
designed to engage with the
contacts of a corresponding
socket-outlet. 3-pin mains
plugs also incorporate
means for the electrical
connection and the
mechanical retention of a
suitable flexible cord.
SS 145- 1: 1997
(3-pin rectangular type 13-
amp plug)
Requirements for
electrical products
SS 472: 1999
(3-pin round type 15-amp
plug)
High Risk Controlled Goods
Controlled Good and
Definition
Safety Standard(s)
Additional Requirements-
(refer to chapter 4.2)
Components of the Liquefied
Petroleum Gas system
Hose
Hose, namely a hose intended
for household use in liquefied
petroleum gas vapour phase
and liquefied petroleum gas or
air appliances not exceeding
5 KPa (50 mbar) operating
pressure.
Regulator
SS 233: 2013
(applicable for hose)
Requirements for
high-risk Controlled
Goods
SS 281: 1984
(applicable for regulator)
23
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Regulator, which is a non-
adjustable device intended for
household use that maintains
the outlet pressure constant at
a nominal value up to and
including 50 mbar,
independent, within specified
limits, of inlet pressure or flow
rate.
Valve
Valve, which is a device that is
made from brass, bronze or
aluminum forging, intended for
household use with liquefied
petroleum gas cylinders, to
control the direction and volume
of flow of the liquefied
petroleum gas.
SS 294: 1998
(applicable for valve)
Domestic electric wall switch
Domestic electric wall switches,
which are electrical manually
operated general purpose
switches for alternating current
only, with a rated voltage not
exceeding 440 V and a rated
current not exceeding 63 A,
intended for household
fixed-electrical installations.
IEC 60669-1: 1998
(valid till 04/08/2021)
or
IEC 60669-1: 2017
Requirements for
electrical products
Requirements for
high-risk Controlled
Goods
SS 403: 1997
(13A fused connection
units switched)
Gas cooking appliances
Gas cooking appliances, limited
to built-in, table, free standing
and portable gas cookers,
which are cooking appliances
intended for household use that
use gas or liquefied petroleum
gas obtained from a
EN 30-1-1: 2008
or
AS 4551: 2008 (Valid till
30/03/2021)
or
AS 5263.1.1: 2016
(gas cooker)
Requirements for
gas appliances
Requirements for
high-risk Controlled
Goods
24
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
non-refillable gas canister up to
1.4 litres as fuel.
EN 30-1-2: 2012
(forced-convection gas
oven)
EN 30-1-3: 2003
(glass-ceramic gas hob
with enclosed covered
burner)
EN 30-1-4: 2012
and
IEC 60335-2-102: 2004
(gas cooker with automatic
burner control system)
SS 401: 1997
(Portable cooking gas
appliance)
Mains socket-outlets
Mains socket-outlets, which are
electrical devices that have 13-
amp or 15-amp switched
shuttered socket-outlets in a
single or multiple arrangement,
to engage with the pins of a
corresponding plug designed
for flush mounting in a suitable
box or for surface or panel
mounting.
SS 145- 2: 1997
(3-pin 13-amp socket-
outlet)
Requirements for
electrical products
Requirements for
portable/wall socket
outlet and portable
cable reels
Requirements for
high-risk Controlled
Goods
SS 145-2:2018
(3-pin 13-amp socket
outlet incorporated with
USB port(s) and/or energy
monitoring device(s))
BS 4177: 1992
(3-pin 13-amp socket-
outlet)
(cooker control unit)
BS 7288: 1990
(3-pin 13-amp socket-
outlet)
(socket-outlet with RCD)
25
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
SS 472: 1999
(3-pin round type 15-amp
socket-outlet)
Refrigerators
Refrigerators, which are
electrical appliances intended
for household use that operate
on the vapour compression
principle for food storage and
preservation, with rated voltage
of not more than 250 VAC.
IEC 60335-2-24: 2000
Requirements for
electrical products
Requirements for
high-risk Controlled
Goods
Water heaters
Water heaters, limited to
instantaneous and storage
types, which are electrical
appliances intended for
household use to heat water
below boiling temperature, with
rated voltage of not more than
250 VAC.
IEC 60335-2-35: 2002
(Instantaneous electric
water heater)
Requirements for
electrical products
Requirements for
water heaters
Requirements for
high-risk Controlled
Goods
IEC 60335-2-21: 2004
(Mains pressure electric
storage water heater)
26
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
4.2 Additional Requirements for registration of Controlled Goods
The CPSO monitors the safety of Controlled Goods sold in Singapore by investigating
complaints, incidents and accidents reported to the CPSO. The information will be leveraged
upon to develop the operational interventions within these additional requirements. These
requirements are to be fulfilled in addition to the applicable safety standards.
Requirements applicable to electrical products
No.
Items
Requirements
1
All appliances
All appliances must be tested to 230 VAC, 50 Hz.
2
Circuit Diagrams
Circuit diagrams must be indicated with component’s
values for products tested to IEC 60065 and IEC
60950.
3
Circuit diagrams of
electronic modules in
electrical appliances
Circuit diagrams of the electronic modules in the
electrical appliances must be provided.
4
Appliances fitted with
voltage selector
(voltage mis-match
test)
Appliance fitted with voltage selector shall be tested
as follows:
Connect appliance to 230 VAC mains with voltage
selector switch to settings not suitable for operation at
230 VAC.
5
Appliances with
tropical condition test
requirements in
applicable Standards
All appliances (with tropical test requirements in
applicable Standards) shall comply with the tropical
condition test as stated in the relevant IEC Standards.
6
Appliances rated 3
kW or connected to
fixed wiring
Electric appliance 3 kW must be connected to fixed
wiring. All connections to fixed wiring must be in
accordance with SS 638. If a range of power output is
given, the maximum value output will be taken. Value
will be based on supplier’s declared output.
7
Controlled Goods
which are Class I
appliances
All Class I appliances must be fitted with 3-pin mains
plugs that are registered with the CPSO.
27
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
8
Controlled Goods
which are Class II
appliances
a) All Class II appliances must be fitted with 2-pin
mains plug (Appendix K) compliant with EN 50075.
b) Class II appliances that are fitted with 3-pin mains
plugs must use plugs that are registered with the
CPSO
9
Detachable power
cord set (consists of
mains plug, mains
cord and appliance
connector)
Detachable power cord set must be listed in the test
report critical component list.
10
Controlled Goods with
rated voltage that are
not suitable for local
supply voltage
a) Controlled Goods with rated voltage that are not
suitable for local supply voltage will not be allowed
for registration unless they are supplied with step-
down isolating transformer and are tested together
with the transformer as a complete set.
b) A test to ensure that the Controlled Goods shut
down/fail safely should the consumer accidentally
plug the product directly into the 230 V mains supply
socket outlet without using the isolating step-down
transformer shall be conducted.
11
Controlled Goods with
direct plug-in 3-pin
(eg. 3-pin AC adaptor,
3-pin Power Line
Adaptor)
Test report showing that the 3-pin (Appendix M) complies
with sub-clauses 12.1 & 12.3 of SS 246 (till 25/10/2021)
or BS 1363-3, or clauses 12.1 & 12.3 of SS 145 -3: 2020
shall be provided.
12
Controlled Goods with
direct plug-in 2-pin
(eg. 2-pin AC adaptor,
2-pin Power Line
Adaptor)
The 2-pin (Appendix M) shall be in accordance with EN
50075.
Requirements applicable to AC adaptor
13
Detachable power
supply cord set not
supplied by
Registered Supplier
a) A Registered Supplier who is not supplying the
detachable power supply cord set together with the
AC Adaptor must provide written instructions to its
customer on the type of approved detachable
power cord set to use. This shall be declared to
the Conformity Assessment Body when applying
for Certificate of Conformity.
b) This requirement is only applicable to Registered
Suppliers whose core business is supplying AC
28
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Adaptors or its Registered Supplier name is
affiliated with the AC Adaptor’s manufacturer.
14
AC Adaptor
incorporated with 13A
socket-outlet
Additional tests clauses to 13, 17 and 18 of SS 246 (till
25/10/2021), or clauses 13, 17 and 18 of SS 145 - 3:
2020 shall be provided.
15
AC adaptor with
detachable
interchangeable plug
pins
A Registered Supplier who is supplying AC adaptors with
detachable interchangeable plug pins must include with
its products, written instructions to inform customers on
the type of detachable interchangeable plug pins that are
approved and suitable to use in Singapore. These
instructions are to be submitted to the Conformity
Assessment Body for verification when applying for
Certificate of Conformity.
16
AC adaptor to be
used with/ bundled
together with Personal
Mobility Devices
(PMDs)
1. Registered Supplier to declare the model of the
AC adaptor that is to be used with/ bundled
together with the PMDs;
2. Registered Supplier to provide valid IEC 60950-1
or IEC 62368-1 test reports for certification and
registration of the declared AC adaptor under the
CPSR; and
3. Registered Supplier to provide the UL 2272 test
report as a supporting document, showing that
the listed AC adaptor in the UL 2272 test report is
the model declared to be used with/ bundled
together with the PMDs.
Requirements applicable to electric airpot
17
Reboil switch
a) No part of the reboil switch is allowed to protrude
into the water pot, even if it is located above the
maximum water level mark.
Requirements applicable to computer products
18
CD/DVD ROM
drive(used in personal
computer)
Test certificate showing that CD/DVD ROM drive has
complied with IEC 60825-1 must be provided.
19
Modem Card (used in
personal computer)
Modem card incorporated in the personal computer must
be tested at set level (sub-clauses 5.1 & 6 of IEC 60950)
or at component level.
29
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
20
Powerline Ethernet
Adaptor incorporated
with 13A socket-outlet
Additional tests to clauses 13, 17 & 18 of SS 246 (till
25/10/2021), or clauses 13, 17 & 18 of SS 145 - 3: 2020
shall be provided.
Requirements applicable to ceiling fan and cycle fan
21
Ceiling fan
a) These appliances if tested to IEC 60335-2-80 must
also be tested to sub-clauses 5.7 and 5.8 of SS
360: 1992 (valid till 31/03/2022) or annex ZA of SS
655: 2020.
b) Installation instruction must mention the 3
expansion bolts for fastening the main suspension,
safety cord, expansion bolt with hook for fastening
safety cord and mounting plate. (Appendix I)
c) The warranty issued shall recommend user to
conduct regular examination of the fan suspension
system at least once in every two years. (For
example: Users are advised to contact the fan
supplier to conduct regular examination of the fan
suspension system at least once in every two
years.)
Written permission from the CPSO shall be
obtained if a warranty with the above note is not
supplied with the product.
22
Cycle Fan
a) These appliances if tested to IEC 60335-2-80 must
also be tested to sub-clauses 5.7 and 5.8 of SS
360: 1992 (valid till 31/03/2022) or annex ZA of SS
655: 2020.
b) Installation instruction shall mention the 3
expansion bolts for fastening the main suspension,
safety cord, and expansion bolt with hook to fasten
the safety cord and mounting plate. (Appendix I)
23
Decorative ceiling fan
a) These appliances if tested to IEC 60335-2-80 must
also be tested to sub-clauses 5.7 and 5.8 of SS
360: 1992 (valid till 31/03/2022) or annex ZA of SS
655: 2020.
b) Installation instruction shall mention the 3
expansion bolts for fastening of the main
suspension, safety cord, and expansion bolt with
hook to fasten the safety cord and mounting plate
(Appendix I).
c) Decorative ceiling fan submitted to Conformity
Assessment Body (CAB) for certification shall be
subjected to conformity check. CAB shall request
a new sample and check the identical safety
30
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
components are listed in the test report of IEC
60335-2-80. The check also covers the minimum
dimension requirements and availability of the
safety cord indicated in the test report of sub-
clauses 5.7 & 5.8 of SS 360 (valid till 31/03/2022)
or annex ZA of SS 655: 2020.
d) Drawing (Appendix H) to show that the wires within
the motor shaft are not stressed must be provided.
e) The warranty issued shall recommend users to
conduct regular examination of the fan suspension
system at least once in every two years. (For
example: Users are advised to contact the fan
supplier to conduct regular examination of the fan
suspension system at least once in every two
years.)
Written permission from the CPSO shall be
obtained if a warranty with the above note is not
supplied with the product.
Requirements applicable to portable socket-outlet and portable cable reel
24
Portable socket-outlet
and portable cable reel
a) If residual current device (RCD) is incorporated, its
tripping current must be less than 30mA and
operating time must be less than 0.1 second and
testing to sub-clauses 9.9.2.1, 9.9.2.2, 9.9.2.3 and
9.16 of SS 97- 2000 are required.
b) The shutters screening the current-carrying socket
contacts shall not be opened by the insertion of any
corresponding SINGLE pin of the plug into any
current-carrying socket aperture.
25
Wall switched socket-
outlet (2 x single
socket-outlet)
Single socket-outlet with 2-gang faceplate/frame must be
fulfilled with the test requirements as 2-gang socket-
outlet.
26
Remote controlled
socket-outlets
Remote controlled wall socket-outlet and/or portable
socket outlet shall not be allowed for registration.
27
3-pin 13-amp socket
outlet incorporated with
type C USB port(s)
or
3-pin portable socket-
outlet incorporated with
type C USB port(s)
3-pin 13-amp socket outlet or 3-pin portable socket-outlet
incorporated with type C USB port(s) shall be tested to
the following
a) SS 145 - 2: 2018with Annex I.3
31
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Requirements applicable to roaster
28
Roaster
A metal ring (Appendix N) must be provided to prevent
the roaster from falling off in the case of the glass bowl
shattering.
If the supplier has other methods, approval would be
required from the CPSO
Note: This requirement is not applicable to a roaster that
is provided with metal bowl.
Requirements applicable to gas appliances
29
Test pressure of town
gas for gas appliances
All gas appliances must be tested up to 31 mbar for town
gas.
30
Gas appliances tested
to EN 30-1-1:
1998/2008
Testing to sub-clause 6.1.6 (Temperature of the LPG
cylinder and its compartment) and sub-clause 6.2.1
(Ignition, cross-lighting and flame stability) must be
carried out.
To use G112 gas as a limit gas for test clause 7.3.2.1.3
third test group to check for occurrence of light back,
under performance clause 6.2.1.1.
31
Flame failure device
(FFD) incorporated in
gas appliances
Component testing
Supplier can choose to provide one of the following:
a) Test report/certificate showing that the FFD
complied with EN 126: 1995 or EN 125: 1991 for
gas appliance tested to EN 30-1-1 at component
level must be provided.
b) Test report/certificate showing that FFD complied
with AG 204: 1984 for gas appliance tested to AG
101 at component level must be provided. (Valid till
30/03/2021)
c) Test report/certificate showing that FFD complied
with AS 4620 Thermoelectric flame safeguards
for gas appliance tested to AS 5263.0:2017 or AS
5263.1.1:2016 at component level must be
provided.
Set testing
32
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Supplier can choose to test to one of the following:
a) Testing to sub-clause 6.1.3 of EN 30-1-1 at set
level must be carried out.
b) Testing to sub-clause 3.6.13 of AG 101at set level
must be carried out. (Valid till 30/03/2021)
c) Testing to sub-clauses of 3.6.1.15 of AS
5263.0:2017 at set level must be carried out.
32
Gas oven
a) It is compulsory for all gas ovens to be fitted with
flame failure device.
33
Toughened glass gas
hob
a) A brochure, entitled ‘Toughened Glass A
Shattering Experience?’ must be included for each
toughened glass gas hob put up for sale. (Order for
the brochure can be placed with the CPSO)
b) Toughened glass gas hob tested to EN 30-1-1
would require any of the following testing and
compliance:
sub-clauses 2.1.15, 2.1.16, 2.1.18,
2.10.9.5, 2.11.2.2 & 5.7.5 of AG101:
1998/AS 4551: 1998 (Valid till 30/03/2021)
sub-clauses 2.1.16(a), 2.1.17, 2.1.19,
2.10.9(e), 2.11.2.2 & 5.7.5 of AG 101:
2000/AS 4551: 2000 (Valid till 30/03/2021)
sub-clauses 2.1.16(a), 2.1.17, 2.1.19,
2.10.8.3(e), 2.11.3(g) & 5.8.4 of AS 4551:
2008 (Valid till 30/03/2022)
sub-clauses of 5.7.101(a), 5.12.101,
5.12.5, 2.14.2.2(d), 2.15.3.101 & 5.7.104 of
AS 5263.1.1:2016
34
Gasket for elbow joint
of gas cooker
Installation instruction must mention the fixing of gasket
for the elbow joint, if applicable (Appendix J).
35
Glass-ceramic gas hob
with enclosed covered
burner (simulated gas
explosion test)
The gas hob must be subjected to the ‘simulated gas
explosion’ test. The hob is filled with an explosive mixture
of gas and detonated with a source of ignition.
36
Material of gas hob
cook top
Different materials require separate certification and
registration. E.g. stainless steel, enamel, stone,
toughened-glass, ceramic-glass
37
Gas Canister
a) All registered gas canisters shall be subjected to
batch test conducted by the laboratory who
conducted the full-type test in accordance with the
sampling plan as shown below:
33
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Batch size
Sampling size
Acceptable
failure size
1 3200
13
2
3201 35000
20
3
35001 150000
32
5
b) The sampled gas canisters shall be tested to the
following clauses of SS 400 as follows:
Clause
Sample size
13
20
32
4.4 (Pressure in canister)
5
8
14
6 (Dimensions)
1
1
1
8.2.3 (Drop)
3
5
8
8.2.9 (Repeated-use)
3
5
8
10 (Markings)
1
1
1
c) Registered gas canister shall be affixed with
‘SAFETY Mark’ and ‘batch test sticker’. Both
labels shall be affixed either on an individual
canister, the packaging of two canisters or
packaging of three canisters.
d) Sample of batch test sticker is as shown below:
38
Installation manual or
installation instructions
for gas cookers
All registered gas cookers shall be supplied with
installation manual or installation instructions within the
operating manual, user’s manual, user’s guide, etc. which
shall also include safety instructions for use of the gas
cooker.
Note: Refer to Appendix O for specifications of LPG and Town Gas supplied in
Singapore
Requirements applicable to Residual Current Circuit Breaker (RCCB)
39
RCCB
a) Registration of RCCB is limited to those with 30
mA sensitivity and the operating time must be less
34
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Requirements applicable to electric instantaneous and storage water heater
40
Instantaneous electric
water heater and
mains pressure electric
storage water heater
a) Heating elements used must not be of the ‘bare-element’
type.
b) Registered Supplier must declare that the water heater is
not using bare heating element when applying Certificate
of Conformity with Conformity Assessment Body.
41
Water heater
incorporated with
residual current device
(RCD)
Testing to sub-clauses 9.9.2.1, 9.9.2.2, 9.9.2.3 and 9.16 of
SS 97: Part 1: 2000 are required.
42
Pressure-relief device
(for closed storage
water heater)
a) Closed water heaters having a rated pressure of 0.6 MPa
and above shall be provided with a pressure-relief device.
b) b) Pressure-relief devices shall prevent the pressure in the
container from exceeding the rated pressure by more
than 0.1 MPa.
43
Thermal cut-out
(for closed
instantaneous and
storage water heater)
a) Closed water heaters shall incorporate a thermal cut-out
providing all-pole disconnection and which operates
independently from the thermostat.
b) Registered Supplier must declare that the water heater is
incorporated with a thermal cut-out providing all pole
disconnection when applying for Certificate of
Conformity.
44
Instruction/user
manual for storage
water heaters
Instruction/user manual of the storage water heaters to
include but not limited to the following information:
a) For consumer
Operating instructions
Parts identification indicating critical safety
components such as the thermostat, pressure relief
valve, etc.), and advice to consumers on how to
identify them
Safety precaution/ tips
General maintenance instructions to include how to
check the functionality of safety features such as the
than 0.1 second. Electronic RCCB will not be
accepted for registration.
b) Registered Suppliers must affix the Safety Mark
on the RCCB and the Safety Mark must be
identifiable when installed.
35
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
pressure relief valve, and good practices to check for
and minimise wear and tear
Troubleshooting guide - e.g. how to look out for signs
of malfunction, and include appropriate warnings to
stop using the appliance, and seek out qualified
service technicians to rectify potential issues
Advise to consumers to have the storage water heater
serviced periodically by a qualified service technician
b) For authorised installers
Installation instructions:
Appropriate storage tank location, and secure
mounting
Electrical connections connections should account
for electrical safety, and prevent short circuit/
electrocution
Piping connections connections should account for
potential pressure build ups and possibility of leakage/
corrosion
Pressure relief valve connection
c) Warning note
To warn the consumer that the storage water heater
should only be repaired/serviced by a qualified service
technician
To warn the consumer that the storage water heater
should only be operated with all the safety devices
fitted and functioning
Requirements applicable to multi-way adaptor
45
Multi-way adaptor with
3-pin socket-outlets or
combination of 3-pin
and 2-pin socket-
outlets
a) The socket contacts of the adaptor shall only accept 13A
3-pin mains plug complying with SS 145 and/or 2.5A 2-
pin mains plug complying with EN 50075.
b) The shutters screening the current-carrying socket
contacts shall not be opened by the insertion of any
corresponding SINGLE pin of the plug into any current-
carrying socket aperture.
c) A barrier or other acceptable means shall be provided on
the engagement surface of the 2.5A 2-pin socket-outlet of
the adaptor to PREVENT entry of any types of 2-pin
mains plugs except those complying with EN 50075.
(note: shutters cannot be regarded as barriers)
36
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
d) Adaptor incorporated with switch would require additional
test to sub-clauses 13.11, 17.1.3 and 18.1.3 of SS 145:
Part 2: 1997.
Requirements applicable to plasma / LCD display monitor
46
Plasma/LCD display
monitor with TV tuner
Plasma/LCD display monitor tested to IEC 60950 would
require additional test to clauses 9 (related to antenna only),
10.1, 10.2, 10.3 and 12.5 of IEC 60065.
Requirements applicable to table lamp / standing lamp
47
Child appealing table
lamp/standing lamp
Child appealing table/standing lamp will not be allowed for
registration unless it is powered by an AC Adaptor. Only the
AC Adaptor would need registration.
Requirements applicable to hot / warm & cold water dispenser
48
Hot & cold water
dispenser
a) Hot water dispenser which has below boiling temperature
shall be tested to IEC 60335-2-21 or IEC 60335-2-35.
b) Testing to IEC 60335-2-24 shall be required if the water
dispenser is incorporated with compressor for dispensing
cold water.
Requirements applicable to high risk Controlled Goods
49
Renewal of registration
for high risk Controlled
Goods
Application for renewal of registration of high risk
Controlled Goods shall be supported with a valid new test
report that is within 3 years when submitted to the
Conformity Assessment Body for re-certification. Valid
new test report refers to new full type test report. The
following are not accepted:
a) Test report (submitted during initial CoC application) +
supplementary test report; and
b) Test report (submitted during initial CoC application) +
verification test report.
The following Controlled Goods are deemed as high risk:
Gas Cooking appliances
Components of LPG system (hose, regulator & valve)
37
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Mains socket-outlets
Water heaters
Refrigerator
Domestic electric wall switch
38
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
5.0 Registration
5.1 Parties that Need to Apply for Registration
No party shall be allowed to advertise and/or supply the Controlled Goods unless they have
been registered with the CPSO. Registered Suppliers are responsible for the safety and
compliance of Controlled Goods registered under their name. The registration will be
withdrawn when the party registered as Registered Supplierceases to supply the Controlled
Goods registered by it. For instance, where it ceases to carry on such business or is no longer
registered with the Accounting & Corporate Regulatory Authority (ACRA).
In general, only one party in the chain of supply of the Controlled Goods in Singapore needs
to register the Controlled Goods with the CPSO. The following descriptions for each party
provide more details on when registration is needed:
Importer
Importers who import Controlled Goods that are meant for sale in Singapore are required to
apply for registration with the CPSO. No registration is needed if the Controlled Goods are
meant for export only. However, these For Export Only’ Controlled Goods shall not be
advertised, supplied, displayed in any retail outlets and/or made available for sale in Singapore
under any circumstances. Merely labelling the Controlled Goods or stamping the receipts with
For Export Only’ is also not allowed.
Parallel Importer
Any parallel importer of the same brand and model of Controlled Goods are also required to
apply for registration.
Retailer
Retailers are required to apply for registration if they import the Controlled Goods themselves.
Retailers who source for registered Controlled Goods and subsequently make modifications
to the Controlled Goods which impact the safety or change the brand and model number of
the Controlled Goods need to apply for registration as well.
Manufacturer
Unless another party in the chain of supply has already registered the Controlled Goods with
the CPSO, manufacturers in Singapore who supply the Controlled Goods to be sold in
Singapore are required to apply for registration.
39
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
New Distributor
When a company (Registered Supplier) relegates its ownership of its registered Controlled
Goods to another business entity, the latter has to re-register the Controlled Goods with the
CPSO Approval from the CPSO is required for the new distributor to take over registration of
the Controlled Goods. Thereafter, the new distributor has to go to a CAB (Certification) or CAB
(Certification MRA) to obtain the CoC prior to having the Controlled Goods re-registered with
the CPSO. For Controlled Goods registered on the basis of SDoC, the new distributor has to
approach the CPSO. Please refer to Chapter 4 for more details on product categorisations to
determine if CoC or SDoC is applicable.
5.2 Registration of Supplier of Controlled Goods
Suppliers who wish to supply the Controlled Goods to consumers in Singapore would first
have to register with the CPSO. After completing the registration process with the CPSO, they
will thereafter be referred to as ‘Registered Suppliers. Registration to be a “Registered
Supplier” is free-of-charge. A flow-chart for registration as a supplier of Controlled Goods is
found below: Becoming a Registered Supplier:
Suppliers wishing to sell Controlled Goods in Singapore can apply to become a
Registered Supplier via online e-Registration:
1)
Visit https://www.cpsa.gov.sg
2)
Select “e-Registration of Registered Supplier” under “NEW APPLICATION” and
follow onscreen instructions
Note that a copy of the Certification of Incorporation of Private Company/Certificate of Registration issued by
ACRA will be required for registration
40
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Changes in Particulars of Registered Supplier
In cases where there are changes to the particulars specified below of the Registered
Suppliers, the Registered Suppliers are required to update this change online not less than
two (2) weeks before such occurrence under Regulation 15 of the Consumer Product (Safety
Requirements) Regulations.
a) Company’s name;
b) Company’s registered address;
c) Name and title of person authorised to represent the company;
d) Telephone number;
e) Email address, etc.
Registered suppliers shall log into their registered supplier account online at
https://cpsa.enterprisesg.gov.sg to update changes to their particulars.
For Registered Suppliers who require assistance logging in:
The username for the Registered Supplier account will be their three-digit Registered
Supplier code
Registered Suppliers can then use their username to do a password reset. The password
reset email will be sent to their registered email address.
Upon successful registration, the Registered Supplier will receive an email which
includes:
The CPSO processes “Registered Supplier” application
a. Their Registered Supplier Code (A 3-alphabet identity code unique to the
Registered Supplier)
b. Softcopy of the SAFETY Mark bromide
Registered Supplier can now register Controlled Goods by submitting SDoCs online or
approaching any designated Conformity Assessment Bodies (CABs) to apply for CoCs
Suppliers may visit www.consumerproductsafety.gov.sg to browse the list of CABs to their products for testing
and certification.
41
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
5.3 Registration of Controlled Goods
For Low Risk Level Controlled Goods
A Registered Supplier that decides to supply Low Risk Controlled Goods in Singapore will
have to submit a Supplier’s Declaration of Conformity (SDoC) to the CPSO. New product
registration can be done online at https://cpsa.enterprisesg.gov.sg. The registration fee for
each new product registration will be $180 (excluding GST), payable to the CPSO.
For more details, refer to the flow-chart for the registration of Low Risk Controlled Goods
found below:
42
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
For Registration of Low Risk Level Controlled Goods (based on SDoC)
The Registered Supplier is required to maintain a Technical File for each registered
Controlled Goods as specified in Chapter 7.
Registered Supplier first obtains documentation (i.e. test reports) certifying their
Controlled Goods meet required safety standards specified in Chapter 4.2. The following
test report types are accepted:
1)
Reports with IECEE CB certificates
2)
Reports issued by testing laboratories accredited by the Singapore Accreditation
Council or its Mutual Recognition Agreement partners
3)
Reports issued by CABs (Testing)
Registered Suppliers may obtain relevant documentation from the original manufacturer
of the Controlled Goods or send Controlled Goods to a CAB (Testing) to be tested
Registered Supplier declares the Controlled Goods comply with the relevant safety
requirements by submitting SDoC online.
1) Visit https://cpsa.enterprisesg.gov.sg
2) Login to Registered Supplier account
3) Select “Registration of SDoC New” in the sidebar and follow onscreen
instructions
The CPSO will approve the registration and issue a Letter of Approval (LOA) if the
information in the SDoC is deemed to be in order
Upon receiving the Letter of Approval, Registered Supplier can affix SAFETY Mark to the
Controlled Goods and sell it in Singapore
43
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
For Medium and High Risk Level Controlled Goods
A Registered Supplier that decides to supply Medium and High Risk Level Controlled Goods
in Singapore shall submit application to CAB (Certification) or CAB (Certification MRA) for
certification.
After the Controlled Goods have been successfully certified, the CAB (Certification) or CAB
(Certification-MRA) shall issue Certificate of Conformity (CoC) (Appendix D) to the Registered
Supplier. The CAB (Certification) or CAB (Certification-MRA) shall submit the CoC with
registration fee of $180 (excluding GST) to the CPSO digitally for registration of the certified
Controlled Goods.
For more details, refer to the flow-chart for the registration of Medium & High Risk Controlled
Goods found below:
For Registration of Medium & High Risk Controlled Goods (based on CoC)
Registered Supplier first obtains documentation (i.e. test reports) certifying their
Controlled Goods complies with required safety standards (Chapter 4.1). All CABs
should know safety standards required. The following test report types are accepted:
1)
Reports with IECEE CB certificates
2)
Reports issued by testing laboratories accredited by the Singapore Accreditation
Council or its Mutual Recognition Agreement partners
3)
Reports issued by CABs (Testing)
Registered Suppliers may obtain relevant documentation from the original manufacturer
of the Controlled Goods or send Controlled Goods to a CAB (Testing) to be tested
Registered Supplier submits the necessary documentation to a CAB (Certification). If
everything is found to be in order, the CAB (Certification) issues a CoC.
Submit CoC to the CPSO. The CPSO will register the Controlled Goods and issue a
Letter of Approval (LOA) if the information in the CoC is deemed to be in order
44
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Note: Many CABs act as both CAB (Testing) and CAB (Certification). Many CABs
(Certification) also submit CoCs to the Safety Authority on the supplier’s behalf. Do check with
CABs to determine their services offered.
The CAB (Certification) shall certify the Controlled Goods without re-testing unless the test
report is found not to be in full compliance to the safety requirements specified in this booklet.
In cases where there is/are modification(s) to the registered Controlled Goods, the Registered
Supplier is required to inform the CAB (Certification) in accordance with the procedure
described in Chapter 5.5. The Registered Supplier is required to maintain a Technical File for
each registered Controlled Goods as specified in Chapter 7.
Suppliers may visit www.consumerproductsafety.gov.sg to browse the list of CABs to send
their products for testing and certification.
5.4 Certificate of Conformity
Certificates of Conformity (CoCs) and Self-Declarations of Conformity (SDoCs) are both
valid for three (3) years. Registered Suppliers who wish to continue supplying their registered
Controlled Goods beyond three (3) years shall initiate the renewal process before their
CoC/SDoC expires, regardless of any changes to the Controlled Goods. Renewal applications
may not be made after the Controlled Goods’ registration expires. In such cases, a new
registration supported by valid documents would be required.
All applications for renewal shall be based on the listed edition or newer edition of the safety
standards in Chapter 4.1. Should the edition of the safety standards on the CoC be earlier
than the listed edition, supplementary testing on the difference(s) between the old and
listed/newer edition or full type-test to the listed/newer edition must be carried out. If the
previous registration was based on an older edition of the standard, application for modification
to upgrade to the latest minimum edition of the safety standard would be required.
Controlled Goods with expired CoCs or SDoCs can no longer be supplied to the domestic
market as they are deemed as ‘non-registered Controlled Goods’. Any person supplying non-
registered Controlled Goods shall be guilty of an offence under Section 11(2) of the Consumer
Protection (Trade Descriptions and Safety Requirements) Act (Chapter 53).
Upon receiving the Letter of Approval, Registered Supplier can affix SAFETY Mark to the
Controlled Goods and sell it in Singapore
45
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Renewal of CoC
Registered Suppliers are to submit applications for renewal to CABs (Certification) or CABs
(Certification-MRA) six months before CoCs expire.
Suppliers should check with the CABs responsible for issuing the initial CoC for subsequent
renewals.
Once the CAB (Certification) or CAB (Certification-MRA) has evaluated the submission, they will submit
the new CoC with the renewal fee of $50 (excluding GST) to the CPSO at
https://cpsa.enterprisesg.gov.sg. CABs may also levy additional charges for certification and
administrative services. A flow-chart for renewal of CoC is found below:
46
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
For Renewal of Medium and High Risk Controlled Goods (based on CoC)
NOK
OK
CAB (Certification) or CAB
(Certification - MRA) issues
a new CoC valid for another
3 years to Registered
Supplier
Registered Supplier
submits CoC with renewal
fee to CPSO to keep the
Controlled Goods in the
Register
Registered Supplier can
continue to supply the
registered Controlled
Goods
CAB (Certification)
keeps the CoC in
the technical file
Registered Supplier submits the
registered Controlled Goods to
the CAB (Certification) or CAB
(Certification - MRA) for re-
certification
CAB (Certification) or
CAB (Certification -
MRA) evaluates the
registered Controlled
Goods
CAB (Certification) or
CAB (Certification -
MRA) informs
Registered Supplier of
discrepancies
Registered supplier is to
track and renew 6
months prior to expiry
date
47
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Renewal of SDoC
Registered Suppliers are to submit applications for renewal six months before the expiry of
SDoCs online at https://cpsa.enterprisesg.gov.sg. Applications submitted after the expired
SDoC would not be accepted for renewal. Application for new registration supported by a valid
SDoC would be required for Controlled Goods with expired registrations.
A flow-chart for renewal of SDoC is found below:
48
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
For Renewal of Low Risk Controlled Goods (based on SDoC)
NOK
OK
Registered Supplier to
resubmit application
Registered Supplier is
strongly recommended to
track and renew 6 months
prior to expiry date
Registered supplier to send
Controlled Goods to testing
laboratory
CPSO issues LOA valid for another three
years to Registered Supplier and lists the
registered Controlled Goods in the Register
CPSO performs
certification and
registers the certified
Controlled Goods
Registered Supplier affixes the
SAFETY MARK and commences
supply of registered Controlled
Goods
Supplier shall maintain technical
file for the certified Controlled
Goods
Registered Supplier declares
Controlled Goods in compliance with
the safety requirements and submits
SDoC to the CPSO for registration
with registration fee
49
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Transfer of CoCs (From Company A to Company B)
If the business entity holding the CoC will be dissolved due to internal reorganization, and a
new entity will be set up to continue supplying the Controlled Good in Singapore, there should
be a transfer of CoC from the old business entity which will be dissolved (Company A) to the
new business entity (Company B).
Company B to apply as a Registered Supplier (if not already registered)
Company B to approach CAB (Certification or Certification-MRA) who issued the CoC
and apply for a new CoC with the following options:
a) to retain the certification number with the current expiry date; or
b) to apply for new certification number with 3 years expiry date
Company A and Company B to submit any other information or document as required
by CAB and/or the CPSO
Company B to submit the new CoC to the CPSO for updating with a fee of $50 plus
GST per registration under option (a) or for registration with a fee of $180 plus GST
under option (b). The CPSO will withdraw the Controlled Good’s registration from
company A and reregister it under company B
Transfer of SDoCs (From Company A to Company B)
An SDoC is a self-declaration by Company A that its product conforms to relevant
safety requirements, therefore transfer of SDoC between companies are not allowed.
Company B will need to do its own self-declaration.
5.5 Modifications to Registered Controlled Goods
Modification (including technical and non-technical changes) refers to any changes made to
the registered Controlled Goods.
Examples of technical changes are:
safety components
new design/enclosure that affect the safety
Examples of non-technical changes are:
colour (except for 3-pin rectangular type 13-amp plug, 3-pin round type 15-amp plug,
multi-way adaptor, 3-pin portable socket-outlet, portable cable reel, RCCB, 3-pin 13-
amp socket-outlet, 3-pin round type 15-amp socket-outlet and domestic electric wall
switch due to different colour resin)
graphic design
factory location (no change in the manufacturing process)
manufacturer’s name
trade name
50
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
model number
year/date of production
The Registered Suppliers may approach the CPSO to determine whether re-certification of
the registered Controlled Goods is required as a result of modification.
The Registered Suppliers shall update their technical file on the registered Controlled Goods
with details of the change and shall be responsible for all safety issues as a result of
modifications and other changes to the registered Controlled Goods.
In a case where there is modification to the registered Controlled Goods, the following
scenarios shall apply:
1) If the modification does not result in a change in the model number even though
the change is technical:
i) The Controlled Goods do not have to be re-registered with the CPSO.
ii) The Registered Supplier only needs to submit the details of modification to the
CABs (Certification) or CABs (Certification-MRA) for re-certification. For
Controlled Goods that are registered based on SDoC, the Registered Supplier
shall submit the details of modification to the Safety Authority.
iii) The Registered Supplier is to update the technical file with the test report and
certification attesting that the modification still meets the safety standard
requirements.
2) If the modification does not result in a change in the model number and the change
is non-technical, which does not affect the safety of the Controlled Goods, e.g.:
merely change(s) in the aesthetics that does (do) not affect the safety of the Controlled
Goods:
i) The Controlled Goods do not have to be re-registered with the Safety Authority.
ii) The Controlled Goods do not have to be re-certified with the CABs
(Certification) or CABs (Certification MRA). For Controlled Goods that are
registered based on SDoC, the Controlled Goods do not need to be re-certified
with the Safety Authority.
iii) The Registered Supplier only needs to update the technical file with the
modification
iv) The Registered Supplier shall be responsible for ensuring that the modification
does not compromise the safety of the Controlled Goods.
3) If the modification results in a change in the model number and the change is
technical:
i) The Controlled Goods have to be certified with the CABs (Certification) or CABs
(Certification-MRA) and registered with the CPSO as per procedure indicated
in Chapter 5.3
51
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
ii) A CoC with new certification number shall be issued by CABs (Certification) or
CABs (Certification-MRA).
iii) The Registered Supplier can affix the SAFETY Mark using the new certification
number and commence supply of the registered Controlled Goods.
iv) The Registered Supplier shall create a new technical file.
4) If the modification results in a change in the model number even though the change
is non-technical and does not affect the safety of the Controlled Goods:
i) The Controlled Goods do not to be re-registered with the CPSO. The
Registered supplier is to declare clearly all the non-technical change(s) in Form
Notification of Modification to Registered Controlled Goods (refer to
www.consumerproductsafety.gov.sg for the form) and submit it to the CPSO
together with the registration fee of $180 (excluding GST) and clear
photographs of the external view (i.e. showing the complete appliance); internal
view (i.e. showing the safety components); rating label; mains plug, etc.
ii) The CAB shall edit the CoC to carry both the new and old trade name/model
number of the modification is accepted.
52
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
6.0 SAFETY Mark
Objective and rationale
Marking of registered Controlled Goods will enable consumers to differentiate between
registered and non-registered Controlled Goods and to participate in their enforcement. It also
serves as a deterrent and a means to check for non-registered Controlled Goods in the market.
Marking
All Controlled Goods registered with the CPSO must bear the SAFETY Mark before they can
be supplied to the Singapore market. Registered Suppliers are responsible for ensuring that
their registered Controlled Goods are affixed with the SAFETY Mark in accordance to the
guidelines stipulated by the CPSO as provided for in Appendix F. The CPSO will conduct spot-
checks on manufacturers’ / importers’ / traders’ warehouses when it is deemed necessary.
Where to apply the SAFETY Mark
The SAFETY Mark can either be affixed on the Controlled Goods or their packaging (to be
affixed in a prominent location).
Preparation of SAFETY Mark
The CABs (Certification) or CABs (Certification MRA) shall allocate certification numbers to
the Registered Suppliers that have submitted Controlled Goods for the purpose of certification.
For SDoC, the CPSO will allocate the certification numbers. The allocated certification
numbers are to help Registered Suppliers in preparing the marking of the Controlled Goods
in advance. It does not imply that the Controlled Goods have been certified by the CABs
(Certification) or CABs (Certification MRA) or registered with the CPSO. Registered
Suppliers shall mark the Controlled Goods ONLY upon receiving the Letter of Approval
(Appendix E ).
Certification Number
The certification number (XXYYYY-ZZ) is a unique number issued by the CABs (Certification)
or CABs (Certification MRA) which is traceable to the Registered Suppliers and the
registered Controlled Goods. The connotation of the certification number is as follows:
XX = year of certification (e.g. 01 for year 2001)
YYYY = serial number (e.g. 1234)
ZZ = CAB identity code (e.g. 11 for CAB ‘A”)
Using SAFETY Mark in Advertisements or Publicity Materials
Please refer to Appendix G for the guidelines.
53
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
7.0 Technical File
Every Registered Supplier in Singapore is required to maintain technical files of all their
registered Controlled Goods as required in Regulation 16 of the Regulations. The contents of
the technical files are specified in the table below. These files are to be maintained by the
Registered Suppliers for at least ten (10) years from the date of expiry of the CoC or the last
renewed CoC.
The maintenance of the technical files is necessary to enable the CPSO to carry out
investigations in the event of a complaint, incident or accident. Regulation 16 also requires
that upon receiving any request by the CPSO, the Registered Suppliers must provide the
relevant technical files to the CPSO within seven (7) calendar days.
In addition, the Registered Suppliers shall be responsible for the regular updating of the
technical files especially if there have been modifications made to the registered Controlled
Goods. Supplementary testing and certification are required if there are modifications with
safety implications.
54
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
List of documents to be included the Technical File
No.
Type of Document
1
Acknowledgement Receipt for Certificate of Conformity [also known as
Letter of Approval (LOA)]
2
Certificate of Conformity (in English version only)
3
Test Reports including its Test Certificates (if applicable) (in English version
only)
4
Full Electrical Wiring/Circuit Diagram or Service Manual (contains the
electrical wiring/circuit diagram)
(Circuit diagram must indicate the component’s values, or alternatively, be
supported with Bill of Material/Part List.)
5
Technical/Constructional Drawing for gas products
6
Photographs showing exterior (whole, front, top and rear view of Controlled
Goods, nameplate, rating label, mains plug, etc.) and interior (critical safety
components) views. Polaroid photographs as well as photocopies (in black and
white) are not acceptable.
7
Photographs for similar/derived models must also be kept together with the
photographs of the basic model.
8
Rating Label (if it is not clear in the photograph)
To provide an original or clear photograph or artwork.
9
User’s Instruction Manual (English version must be included)
10
Record of Modification, if any
Note:
Registered Suppliers are to maintain the testing results of every registered Controlled Goods.
The testing results may be of help to determine whether the fault occurring in an incident or
accident is attributed to a single product or a single batch.
55
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix A - Definitions
Authority means the Consumer Product Safety Office (CPSO), an office overseen by
Enterprise Singapore that oversees the implementation of consumer product safety laws
including the Consumer Protection (Consumer Goods Safety Requirements) Regulations
2011 (CGSR) and Consumer Protection (Safety Requirements) Regulations (CPSR).
CAB means Conformity Assessment Body that conducts Conformity assessment for
Controlled Goods.
CAB (Certification) means CAB that is designated by the CPSO, to issue CoCs for products
or Controlled Goods supplied in Singapore, as specified in the First Schedule to the Consumer
Protection (Safety Requirements) Regulations and/or overseas partners’ scheme.
CAB (Certification MRA) means CAB that is located in the MRA partner country and is
designated by the Designating Authority of the MRA partner to issue COC.
CAB (Testing) means testing body that is designated by the CPSO to perform testing for
products or Controlled Goods supplied in Singapore, as specified in the First schedule to the
Consumer Protection (Safety Requirements) Regulations and/or overseas partners’ scheme.
CAB (Testing MRA) means testing body CAB designated by overseas MRA partners to
perform testing for products or Controlled Goods supplied in Singapore, as specified in the
First schedule to the Consumer Protection (Safety Requirements) Regulations.
COC means Certificate of Conformity issued by either CAB (Certification) or CAB
(Certification-MRA).
Controlled Goods means any goods of a type, class or description specified in the First
Schedule of the Consumer Protection (Safety Requirements) Regulations.
MRA means a Mutual Recognition Agreement or Arrangement between Singapore and any
other country/customs territory.
LOA means Letter of Approval issued by the CPSO.
Registered Controlled Goods means any Controlled Goods registered with the CPSO under
Regulation 7 of the of the Consumer Protection (Safety Requirements) Regulations.
56
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Safety Authority means the Enterprise Singapore Board (Enterprise Singapore) (formerly
known as Standards, Productivity and Innovation Board) established under Section 3 of the
Enterprise Singapore Board Act 2018.
SAFETY Mark means the SAFETY Mark specified in the Second Schedule of the Consumer
Protection (Safety Requirements) Regulations.
SDoC means Supplier’s Declaration of Conformity. It is a declaration by the Registered
Supplier that the controlled goods conform to the safety requirements specified by the CPSO
for the Controlled Goods.
IEC means the International Electrotechnical Commission.
SS means Singapore Standard.
GST means Goods & Services Tax.
57
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix B - Examples of Controlled Goods
The following are some examples of Controlled Goods. The examples are by no means
exhaustive and therefore, products not listed here do not mean they are not Controlled
Goods. The detailed definitions of Controlled Goods are stated on Chapter 4.2 of this
Information Booklet. If you are uncertain whether your product falls within the definitions of
Controlled Goods, you may contact us at 6898 1800 or
consumerproductsafety@enterprisesg.gov.sg for clarification.
Cooking Range
Built-in Electric Hob
Free-standing Electric Oven
Built-in Electric Oven
Built-in Electric Grill
Built-in Electric Steam Oven
Built-in Electric Induction Hob
Built-in Deep Fat Fryer
Washing Machine
Top-loading Washing Machine
Front-loading Washing Machine
Twin-tub Washing Machine
Washer cum Dryer
Iron
Dry Iron
Steam Iron
Traveller Iron
Iron with Steam Generator/Boiler
Adaptor
AC-DC/AC-AC Adaptor
Multi-voltage AC Adaptor
Power AC Adaptor
Breast pump Adaptor
Hair care appliances
Hand-held Hairdryer
Wall-mounted Hairdryer
Wall-mounted Hairdryer with Shaver Unit
Hair curlers, hair straighteners and hair
stylers
Bladeless hairdryer
Toaster, Grill, Roaster, Hot Plate, Deep Fat
Fryer, Wok and Similar Appliances
Toaster Oven
Electric Barbeque
Grill
Hot-plate
Sandwich Maker
Waffle Maker
Hot-plate with
Steam Boat
Deep Fat Fryer
Bread Toaster
Electric Wok
Air Fryer
Microwave Oven
Microwave Oven
Microwave Oven with Grill
Fans
Wall Fan
Cycle Fan
Ceiling Fan
Table/Desk Fan
Floor/Standing Fan
Box Fan
Tower Fan
Clip-on Fan
Air Circulator
Bladeless Fan
58
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Audio and Video products
Coffee Maker, Slow Cooker, Steam Boat and
Similar Appliances
High-Fidelity Set
CD-Rom Video
game
DVD Video
Recorder
Hi-Fi System
AV Receiver
CD Player
Tuner
Amplifier
Equalizer
Karaoke Mixer
Surround
Processor
Turntable
Minidisc Recorder
Active Subwoofer
Cassette Tape
Deck
Home Theatre
System
Television/Video
display unit
Portable/clock
radio
Coffee Maker
Coffee Maker cum
Grinder
Slow Cooker
Steam Boat
Pressure cooker
Food Steamer
Soybean Milk
Maker
Electric Medicine
Pot
Stewing Pot
Soup warmer
Room Air-Conditioner
Window Room Air-conditioner
Vertical Room Air-conditioner
Mixer, Blender, Mincer and Similar Appliances
Juice Extractor
Food Slicer
Food Mixer
Blender
Food Processor
Food Chopper
Liquid Heating Appliances
Jug Kettle
Water Dispenser with Hot/Warm Water
Airpot
Cordless Kettle/Jug
Decorative Lighting Fixture
Decorative Lighting Chain
Christmas Tree Lighting
LED lighting
Vacuum Cleaner
Vacuum Cleaner
Wet / Dry Vacuum Cleaner
Vacuum Cleaner with Steam Generator
Gas Canister
Gas Canister (for use with portable gas
cooker)
Switch
Domestic electric wall switch with
weather-proof cover
Socket Outlet
3-pin 13-amp socket-outlet with weather-
proof cover
3-pin round type 15-amp socket-outlet with
weather-proof cover
59
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Home Computer System
Table/Standing Lamp
LED table lamp
CRT Computer
Monitor
LCD
Display/Monitor
Printer
Plotter
Personal
Computer (CPU)
Multimedia
Active Speaker*
External drive
*Applicable to mains
operated only
Internal set-top
box
Scanner
Docking station
Notebook
Computer*
Multimedia
projector
Power line
Communication
equipment
Lamp Control Gear
Ballast (Electronic / Magnetic type)
LED Driver
60
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix C - Examples of Non-Controlled Goods
The following are some examples of products that are currently not in the list of Controlled
Goods and therefore deemed as non-Controlled Goods under the Consumer Protection
(Safety Requirements) Regulations. However, these non-Controlled Goods may be under the
purview of other regulatory authorities. The products listed here are meant for reference only
and it is non-exhaustive. It does not mean that they cannot be included as Controlled Goods
in the future. The detailed definitions of Controlled Goods are stated on Chapter 4.2 of this
Information Booklet.
Meanwhile, the onus of ensuring that these products and their accessories are safe rest with
you and this advice is given without prejudice to any amendments to the Consumer Protection
Act, its Regulations or the List of Controlled Goods.
Air cleaner / Air purifier / Air steriliser / Air
ioniser / Air humidifier
Altar lamp
Baby food warmer
Baby milk bottle steriliser
Battery
Bread maker
Battery charger
Body massager
Bulb / Fluorescent lamp
Cathode ray tube television receiver
Camping stove/non re-usable gas canister
Can opener
Car audio
Coffee grinder
Commercial LPG system
Cooker hood
Cloth steamer
Chest/standing freezer
Car vacuum cleaner
Centrally operated vacuum cleaner
system
Components used in PCs
Cup warmer
Clothes dryer
Dishwasher
DC operated vacuum cleaner/Cordless
vacuum cleaner
Dehumidifier
Energy saving device
Electric ice crusher
Electronic disinfector
Electronic type-writer
Ice-cream maker
Insect/Mosquito killer
Immersion water heater
Juke box
Light bulb
Multiway adaptor with solely 2-pin
socket-outlet
Massage chair (mains operated)
Milk froth maker
Portable misting fog fan
Mobile split air conditioner
Night light
Portable television operates on battery
supply only (e.g. car battery)
Portable single unit air-conditioner
Portable socket-outlet with solely 2-pin
socket-outlet
Portable cable reel for industrial use
Popcorn maker
SPA machine
Steam steriliser
Steam cleaner
Security alarm system
Socket for fluorescent lamp
Starter socket
Split system air-conditioner (fixed)
Solar cooker (using high intensity light
bulbs)
Solar storage water heater
Trouser press
Tumbler dryer (clothes dryer)
Uninterrupted power supply (UPS)
Wall USB outlet
61
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Electronic wall-switch
Electric chocolate maker
Facial steamer
Foot massager
Fluorescent tube
Fax machine/Photocopying machine (not
link to personal computer)
Food dehydrator
Glue gun
Hand dryer
Vending machine
Ventilation fan / Exhaust fan
Video cassette rewinder
Video cassette recorder
Security video recorder
Water distiller
Wine cooler
Wet grinder (e.g. peanut grinder)
Important Note:
Most of the above listed non-Controlled Goods are regulated under the Consumer Protection
(Consumer Goods Safety Requirements) Regulations 2011 (CGSR) effected from 1 April
2011. For information on CGSR, please refer to ‘Consumer Protection (Consumer Goods
Safety Requirements) Regulations 2011 Information Booklet which is available at
www.consumerproductsafety.gov.sg.
62
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix D Certificate of Conformity
CONSUMER PROTECTION
(SAFETY REQUIREMENTS) REGULATIONS
Certificate of Conformity (CoC)
CAB (Certification)’s or CAB (Certification MRA)’s Letter Head
To: RS Identity Code
Registered Supplier
Date of Certification :______________________
Date of Re-certification : _______________________
Date of Expiry :______________________
Certificate Number :______________________
Dear Sir/Madam,
We certify that the following Controlled Goods complied with the Mandatory Requirements of the
Consumer Protection (Safety Requirements) Regulations:
Description of Controlled Goods: _________________________________________________________
___________________________________________________________________________________
Trade Name: ________________________________________________________________________
Model Number: ______________________________________________________________________
Country/Region where Controlled Goods are likely to be manufactured: __________________________
Test report number: __________________________________________________________________
Testing laboratory: ____________________________________________________________________
Tested according to: __________________________________________________________________
______________
CAB
Certifying Officer
Important Notice:
No Controlled Goods can be supplied in Singapore unless they are registered with the Consumer Product Safety Office
(CPSO). Please access https://cpsa.enterprisesg.gov.sg for registration procedure.
63
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix E Letter of Approval
CONSUMER PROTECTION
(SAFETY REQUIREMENTS) REGULATIONS
Letter of Approval
To: Registered Supplier
Date of registration: _______________________
Dear Sir/Madam,
We acknowledge receipt of Certificate of Conformity,
Certificate Number: _____________________________,
for registration of Controlled Goods, ___________________________,
Trade Name: _____________________________,
Model Number: _________________________________,
and would like to confirm that the Controlled Goods are entered into the Register of Registered
Controlled Goods, pursuant to the Consumer Protection (Safety Requirements) Regulations.
________________
Consumer Product Safety Office
64
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix F - Guidelines for Using Safety Mark on Registered Controlled
Goods
The SAFETY Mark comprises of a safety logo enclosed in a square on the left and the word
“SAFETY MARK” enclosed in a rectangle on the right. Below the logo is a unique certification
number traceable to the registrant. The colour used is Pantone 032C.
1) SAFETY Mark without Contrasting Background (e.g. embossed on body of
Controlled Goods)
The safety logo, letters and certification number shall be of raised or lowered depth of not less
than 0.51 mm.
The SAFETY Mark (consisting of both the safety logo and the word “SAFETY MARK”) shall
have a height of not less than 9.5 mm. The certification number shall have a height of not less
than 2.8 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the CPSO.
2) SAFETY Mark with Contrasting Background (e.g. silk screened on body of Controlled
Goods or printed on rating labels or carton boxes or as standalone adhesive labels)
The SAFETY Mark (consisting of both the safety logo and the word “SAFETY MARK”) shall
have a height of not less than 6.0 mm. The certification number shall have a height of not less
than 1.6 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the CPSO.
3) Points for adherence
i. The SAFETY Mark shall be fully reproduced with the safety logo enclosed in a square
on the left, the word “SAFETY MARK” enclosed in a rectangle on the right and the
certification number traceable to the registrant across the bottom.
ii. The SAFETY Mark can be embossed or silk screened on any coloured material or
printed with the same colour used for rating labels or carton box markings. When
65
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
printed as standalone adhesive labels, the colour of the safety logo, the background
for the word “SAFETY MARK” and the certification number is Pantone 032C.
iii. The SAFETY Mark shall be easily discernible on the Controlled Goods.
iv. The SAFETY Mark shall be indelible and legible. The marking shall not be removed
when rubbed lightly with a piece of cloth soaked with petroleum, spirit or water.
v. Rating labels or standalone adhesive labels with the SAFETY Mark shall not come
loose or curled at the edges.
vi. Please refer to the bromide provided by the CPSO for size relationship between the
safety logo and the word “SAFETY MARK”. They could be enlarged or reduced
proportionately and still meet the size requirements stipulated in point (1) and (2),
depending on whether the background is non-contrasting or contrasting.
Compliance is checked by visual inspection as well as the test mentioned in above
paragraph (iv).
4) SAFETY Mark on AC Adaptors
For AC Adaptors (to be used with other products), registration is granted for the adaptors
only and does not cover the other products. Therefore, only the adaptors should be affixed
with the SAFETY Mark.
However, if the packaging containing both the AC Adaptors and other products is to be affixed
with the SAFETY Mark, then the statement “This SAFETY Mark applies to the AC Adaptor
only” has to be printed near the SAFETY Mark.
5) SAFETY Mark on 3-Pin Mains Plugs
For 3-pin mains plug (13 and 15 Amperes), the SAFETY Mark must carry the statement ‘for
mains plug’ below the certification number.
(for mains plug)
6) SAFETY Mark on 3-Pin Portable Socket-Outlet and Portable Cable Reel
66
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
For 3-pin portable socket-outlet and portable cable reel, the SAFETY Mark must carry the
statement ‘for 3-pin portable socket-outlet’ or “for portable cable reel” respectively below
the certification number.
(for 3-pin portable socket-outlet) (for portable cable reel)
7) SAFETY Mark on Residual Current Circuit Breaker (RCCB), Mains Socket Outlet,
Domestic Electric Wall Switch, Lamp Control Gears and Isolating Transformer for
Downlight Fitting
These five categories of Controlled Goods which are part of the electrical installations are
required to have the SAFETY Mark prominently affixed on the products to assist both
consumers and electrical installation inspectors in identifying registered Controlled Goods.
8) Displaying of Registered Controlled Goods at Retail Outlets
To assist consumers in identifying registered Controlled Goods, Registered Suppliers are
required to display the SAFETY Mark prominently on the front of all display sets in retail
outlets.
67
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix G - Guidelines for Using Safety Mark in Advertisements or
Publicity Materials
1) The SAFETY Mark shall be used for products registered under the Consumer Protection
(Safety Requirements) Regulations.
2) The SAFETY Mark is only complete with the respective certification number. When used in
advertisements, the SAFETY Mark with the certification number for each registered model
should be used if there is more than one model advertised. If there is a space constraint, a
single SAFETY Mark may be used.
3) The following statement may be used with the SAFETY Mark:
i. “The product (state the name and model no.) has been type-tested and considered to
be in compliance with the safety requirements of the Standard (state the standard) and
hence registered and entered into the Register of Registered Controlled Goods, (under
pursuant to) the Consumer Protection (Safety Requirements) Regulations 2002. The
registration is NOT an endorsement of the quality control system of the manufacturing
process”.
ii. “Look for the SAFETY Mark”
iii. “Insist on the SAFETY Mark”
iv. “Safe Home with the SAFETY Mark”
4) Statements like “approved by XXX”, “XXX-tested safe for use”, “XXX-certified” should NOT
be used. Use of such statements is misleading because the scheme only requires one
sample of the said model to be type-tested.
5) Any statement referring to the Consumer Protection (Safety Requirements) Regulations or
the SAFETY Mark, other than those stated in Paragraph iii) above should be sent to the
CPSO for vetting before publication. For any enquiries, please contact us at 6898 1800 or
Email: consumerproductsafety@enterprisesg.gov.sg
68
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
EXAMPLE
Safe Home with the SAFETY Mark
69
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix H - Drawings Showing Acceptable and Not Acceptable Fan
Motor Shaft for Decorative Ceiling Fan
70
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix I - Diagram Showing the 3 Expansion Bolts, Safety Cord,
Expansion Bolts with Hook and Mounting Plate of Ceiling Fan
71
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix J - Installation Instructions for Fixing Gas Cooker Elbow Joint
The gasket depicted above is to prevent gas leakage. After installation, turn on the gas supply
and use soap solution (never use naked flame) to check for gas leakage.
72
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix K - Examples of 2-Pin Mains Plug In Accordance To EN 50075
73
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix L - Examples of Non-Acceptable Mains Plugs
74
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix M - Examples of 2-Pin And 3-Pin AC Adaptors
75
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix N - Diagram Showing A Metal Ring Around Glass Bowl Used
with Roaster
roaster
glass bowl
metal ring
Note:
If supplier has other method to prevent the roaster from falling off in case of the glass
bowl shattered, please seek approval from the CPSO.
This requirement is not applicable to roaster that is provided with metal bowl.
76
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix O - Specifications of Gases Distributed in Singapore for
Domestic Gas Appliances
Town Gas Source: City Gas Pte Ltd
Town Gas Specification:
The typical properties of gas manufactured by City Gas Pte Ltd are as follows:
1
Gas Type
Group 5
2
Specific Gravity
0.50 0.59
3
Gross Calorific Value
18.63 MJ/m
3
± 3%
@ 288.75 K & 101 kPa
4
Wobbe Index
23.15 26.35 MJ/m
3
5
Weaver Flame Speed
32 - 42
6
Stoichiometric Combustion Air
4.4 vol / vol of gas
7
Limits of flammability
3-0 55% of gas in air
8
Carbon Monoxide
6% vol (max)
9
Ignition Temperature
>400 ºC
10
Theoretical Flame Temperature
~2000 ºC
Typical Town Gas Composition:
The following list the individual components in the piped-gas. During normal operations, the expected
variations are given as low and a high range. This list is intended to be a guide where specific and
technical information is required.
Components
Volume %
Typical
Range
Hydrogen
49.5
41 - 65
Methane
26.7
4 - 33
Ethane
1.3
0 - 2.6
Propane
0.1
0 - 1.3
Butane
0.2
0 - 1.7
Pentane
0.4
0 - 5
Carbon Monoxide
3.2
2 - 6
Carbon Dioxide
13.2
9 - 20
Nitrogen
4.5
2 - 10
Oxygen
0.9
0.5 - 2.5
Gas supply pressure: Between 10 mbars and 20 mbars (inclusive of both pressures) measured at the
outlet of the gas service isolation valve.
All equipment designed for use with town gas must operate on a minimum supply pressure of 63mm
water gauge.
(Please note that the gas pressure at the appliance level may be different from gas service isolation
valve.)
77
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
LPG Specification:
Volume
Composition
%
Gross
calorific
value
MJ/m
3
Wobbe
index
MJ/m
3
Specific
gravity
(air=1)
Flame speed
factor
(H
2
=100)
Supply Pressure
Min.
Nom.
Max.
Butane
66-67
116.76±
1%
83.8-84.6
1.893-
1.935
16.01
20
29
35
Propane
26-34
78
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix P - Controlled Goods Subject to Additional Requirements by
Other Agency(ies) in Singapore
The information on this page is to inform all relevant suppliers of air-conditioners and
refrigerators on the endorsed restriction on the use of HC refrigerants in Singapore by the
Singapore Civil Defence Force (SCDF).
While we recognise that HC refrigerants have an edge over some other refrigerants in terms
of their environmental impact, the main consideration is that HC refrigerant is extremely
flammable and would pose a potential safety hazard to users and occupants. These are
additional risks which can be avoided if safer alternative refrigerants or other refrigerant blends
are used. Notwithstanding the restriction on certain applications, SCDF, together with the
CPSO would continue to monitor the market for emerging alternatives to HC refrigerants that
could better address the safety, environmental and economic concerns.
Refrigerators and Air-conditioners for use domestically which are currently classified as
Controlled Goods are allowed to use HC refrigerants under the Consumer Protection (Safety
Requirements) Regulations (CPSR). Details are highlighted in the table below:
Policy Recommendations on Usage of Hydrocarbon Refrigerant
Product Category
Detail on restriction on HC usage
Domestic refrigerators
and air-conditioners
(eg. Stand-Alone and
wall mounted air-con
units)
To allow the use of HC refrigerant for domestic refrigerators subject
to a charge weight cap of 150g of HC refrigerant and the refrigerant
must be hermetically sealed within the refrigerator (reference from
IEC 60335-2-24) and safety requirement under the Consumer
Protection (Safety Requirements) Regulations (CPSR).
Advisory label requirements on domestic refrigerators
To allow the use of HC refrigerant in air-conditioners subject to safety
requirement under the CPSR (e.g. Non-drop-in
1
unit Mobile split air-
conditioner, Room air-conditioner
Suppliers are to refer to the Circular on the Implementation of Advisory Label for Domestic
Refrigerators Using Flammable Refrigerant in Singapore on the advisory label guidelines.
Details of the circular can be found here.
1
Drop-in replacements refer to the direct replacement of refrigerant in existing equipment or application with alternative
refrigerant, without modifying the operating specifications and design of the equipment or application.
79
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
Appendix Q - Summary of Updates
No.
Chapter
Changelog (only main changes will be highlighted)
1
N/A
Updated the office overseeing the Consumer Protection
(Safety Requirements) Regulations (CPSR) as the
Consumer Product Safety Office (CPSO)
Updated website for CPSR to
www.consumerproductsafety.gov.sg
Removed instructions for submitting of hardcopy form for
registration as registered supplier and provided
instructions for online registration
2
Chapter 4
Updated requirement that Controlled Goods having an
enclosure shaped/decorated like a toy shall not be
allowed for registration, as this requirement is already
addressed in the relevant safety standards
Updated all mentions of SS 246 to clarify that SS 246 shall
be valid till 25/10/2021
Updated additional requirements for 3-pin 13-amp socket
outlet incorporated with type C USB port(s) or 3-pin
portable socket-outlet incorporated with type C USB
port(s) to compliance with SS 145 - 2: 2018 with Annex I.3
to avoid overlapping regulatory requirements
Clarified that Toughened glass gas hobs tested to EN 30-
1-1 can choose to comply with sub-clauses 2.1.16(a),
2.1.17, 2.1.19, 2.10.8.3(e), 2.11.3(g) & 5.8.4 of AS 4551:
2008 until 30/03/2022
80
The Consumer Product Safety Office (CPSO) safeguards consumer safety by ensuring consumer products supplied in Singapore are safe for use and comply
with applicable safety standards. The CPSO is an office overseen by Enterprise Singapore.
Visit www.consumerproductsafety.gov.sg for more information.
3
Chapter 5
Updated process for updating change in particulars of
registered supplier online
4
Appendix A
Provided a list of definitions for terms commonly used with
regards to the Consumer Protection (Safety
Requirements) Regulations (CPSR)
- End of Information Booklet -