STONE LOOK
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
12 x 24
Floor Tile
(11-9/16" x 23-3/8")
(29.40 cm x 59.30 cm)
3/8" 15.04 8
18 x 18
Floor Tile
(17-11/16" x 17-11/16")
(45.01 cm x 45.01 cm)
5/16" 17.44 8
12 x 12
Floor Tile
(11-13/16" x 11-13/16")
(30.00 cm x 30.00 cm)
5/16" 15.52 16
10 x 14
Wall Tile
(9-13/16" x 13-15/16")
(24.99 cm x 35.40 cm)
5/16" 14.25 15
4 x 12
Wall Tile
(4-1/4" x 12-7/8")
(10.91 cm x 32.77 cm)
5/16" 10.64 28
2 x 4 Straight-
joint Mosaic
(Dot-mounted)
(12" x 12" Sheet)
(30.48 cm x 30.48 cm Sheet)
1/4" 10.00 10
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com. ©2021 Daltile (2/21)
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42 *
Exterior Floor Applications
(including patios, pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A *
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more
information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Suitable for exterior applications (provided it is noted as suitable in the applications
chart above) in non-freezing climates, when proper installation methods are followed.
Wall tile not suitable for this application.
* Mosaic tile only
INSTALLATION
Grout Joint Recommendation Shade Variation
Floor: 3/16" (Overlap should not
exceed 33% when installing tile with a
length 15" or greater in a staggered
brick-joint pattern.)
Wall: 10 x 14: 1/16"
4 x 12: 1/16" (When rectangular size
is installed in a staggered brick-joint
pattern, overlap should not exceed 33%.)
Mosaic: 1/8"
High (V3)
PERFORMANCE CHARACTERISTICS
ASTM#
Floor
Result
Wall
Result
Mosaic
Result
Water Absorption C373 < 7.0% < 20.0% < 3.0%
Breaking Strength C648 > 250 lbs 120-230 lbs > 250 lbs
Scratch Hardness MOHS 7.0 4.0-6.0 7.0
Chemical Resistance C650 Resistant Resistant Resistant
For additional information on test results, visit us at:
daltile.com/information/TestResults.
NOTES
Since there are variations in all fired ceramic and natural products, tile and
trim supplied for your particular installation may not match samples. Final
confirmation should be made from actual tiles and trim prior to installation.
Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear
can create slippery conditions. Floor applications expected to be exposed to
these conditions require extra caution in product selection.
For additional information refer to “Factors to Consider” at: daltile.com/Factors.
Special consideration needs to be given when installing tiles greater than 15
inches. Please refer to daltile.com/LargeTiles for more information.
POST-CONSUMER
RECYCLED MATERIALS
PRE-CONSUMER
RECYCLED MATERIALS
MADE IN THE U.S.A. REVEAL IMAGING
®
All or select items within this series meet the requirements for these
qualifications. For more information, visit daltile.com.
BALANS
™
GLAZED CERAMIC
TRIM
Type Number Size
Pieces/
Carton
Floor Bullnose P-43C9 3 x 12 22
Wall Bullnose
(10" side)
S-4310 3 x 10 54
Wall Bullnose
Corner
SN-4310 3 x 3 32
Quarter Round A-106 1 x 6 152
Quarter Round
Corner
UC-106 1 x 1 40
12" Jolly S-1/212J 1/2 x 11-15/16 12
DURABILITY
Floor Surface Wear Resistance
1 Residential Bathrooms 3 All Residential / Light Commercial
2 All Residential Areas 4 All Residential / Commercial